2711-K10C10L1 overview
The Allen-Bradley 2711-K10C10L1 is a keypad terminal for the PanelView Standard platform, drawing 24 VDC or 85 to 264 VAC from the panel supply.
This 2711-K10C10L1 is an operator interface from the PanelView Standard line, 10 in class. The panel replaces pushbuttons and lamps with screens, so recipe changes and fault messages can be handled without rewiring the door.
Screens are built in the configuration software and downloaded over the same link the terminal uses at runtime. The terminal holds the project in internal memory, so a replacement unit needs the file before it can go back into service — that file is usually the first thing to look for when an old panel dies. Contrast, backlight and touch calibration are set from the terminal menus and are not lost when the power is cycled.
Environment matters more than the data sheet suggests. Ambient temperature inside a closed cabinet is usually 10 to 15 °C above the room, and humidity that condenses on a cold morning is what takes out the electronics in a washdown plant. Where the panel sits near a drive or a large transformer, keep the signal cables screened and grounded at one end only.
These terminals sit on packaging lines, water plants, press cells and conveyor control desks. In most plants they are the only place where the fault text appears, which is why a dark screen stops production faster than a failed I/O card.
Fit is decided by three things: the cutout size in the door, the supply voltage and the communication port. Two terminals from the same family can share a screen size and still differ in all three, so the suffix on the failed unit is the one to match. The project file and the cable are usually reused.
Replacement orders go wrong for three reasons: a suffix that changes the voltage, a connector that looks similar but is keyed differently, and a project file that was never saved. Checking the label against the quotation covers the first two, and a copy of the program covers the third. If the label is worn, the machine serial number usually leads back to the original build list.
2711-K10C10L1 specifications
| Model | 2711-K10C10L1 |
| Manufacturer | Allen-Bradley |
| Product family | PanelView Standard 2711 |
| Product type | Keypad Terminal |
| Display type | Monochrome or color TFT, size depending on catalog number |
| Operator input | Touch screen or keypad, depending on catalog number |
| Supply voltage | 24 VDC or 85 to 264 VAC, depending on catalog number |
| Enclosure rating | NEMA Type 12/4/4X front panel, IP65 |
| Operating temperature | 0 to 50 °C (32 to 122 °F) |
| Storage temperature | -25 to 70 °C (-13 to 158 °F) |
| Relative humidity | 5 to 95%, non-condensing |
| Certifications | CE, cULus |
| Condition | Tested and cleaned, in good working order |
| Warranty | 12 months |
| Place of origin | Made in USA |
| Stock status | In stock |
| Series | PanelView Standard |
| Current rating | Not available |
| Communication interface | Not available |
2711-K10C10L1 installation and sourcing
Each unit is inspected, cleaned and packed for export, and it carries a 12 month warranty. Tell us the destination port if you want the freight included in the quotation.









