The 1746-SIM is the module you drop into a spare slot when you need to prove out an SLC 500 program without any field wiring attached. It gives you a bank of toggle switches acting as inputs and a bank of indicator lamps acting as outputs, so a tech can force states by hand and watch the logic react in real time.
Why a simulator slot earns its space
Commissioning goes faster when the programmer can toggle an input at the panel instead of walking out to a limit switch. Troubleshooting gets cleaner too: if the logic behaves correctly with the simulator but fails with real sensors, you know the program is fine and the field side needs attention. Shops that keep a running spare chassis almost always keep one of these in it.
Key specifications
| Manufacturer | Allen-Bradley |
| Product family | SLC 500 (1746/1747) |
| Product type | PLC Module |
| Product Code | 1746-SIM |
| Place of Origin | Made in USA |
| Backplane Current (5 V DC) | Not available |
| Number of Input Switches | Not available |
| Number of Output Indicators | Not available |
| Dimensions (W x H x D) | Not available |
| Net weight | Not available |
| Mounting | 1746 chassis (4, 7, 10, 13 or 16 slot) |
| Backplane supply | SLC 500 parallel backplane |
| Enclosure rating | Open style, IP20 |
| Operating temperature | 0 to 60 °C (32 to 140 °F) |
| Storage temperature | -40 to 85 °C (-40 to 185 °F) |
| Relative humidity | 5 to 95%, non-condensing |
| Certifications | CE, cULus |
| Condition | Tested and cleaned, in good working order |
| Warranty | 12 months |
| Stock status | In stock |
Bench habits that pay off
Treat the simulator as a tool with a routine, not a toy. Before every program download, run the same short sequence: set a known input pattern, step the logic, and compare the output states against what the drawing says should happen. Ten minutes of that catches most address errors before they reach a live machine. Keep the module labeled in the spares drawer, because the switch bank positions wear with use and a worn switch that reads intermittently will waste an afternoon. When a technician new to the SLC 500 joins the team, walking one full logic pass with the simulator is the fastest orientation there is.
Setup notes
The module occupies a standard single-width 1746 slot and draws its power from the backplane, so there is nothing to wire. Address it exactly like any other discrete card, then remove or leave it in place once the machine ships. Customers ordering this part usually want it for test rigs, training benches, or to complete a spare-parts shelf alongside their existing SLC 500 rack.










