Rated at 3 kilowatts, the 2198-E4030-ERS is an AC drive from the Allen-Bradley Kinetix servo drive family, built to hang vertically on a panel inside a 380/480 V AC cabinet. Its front face carries dual Ethernet ports and a mini USB socket, so network access and local configuration sit side by side instead of behind a lift-off cover. At 4.5 kilograms it is a two-hand lift onto the mounting plate rather than a trolley job, and every terminal landing stays reachable from the front once the frame is bolted down.
Input, control power and heat
The main feed is 380/480 V AC, while a separate 24 V DC control supply keeps the logic alive before the power stage is charged. That split pays off at commissioning: the drive can answer the controller across the network while the bus is still cold. Heat rejection is 220 watts at 480 V AC, and cooling is natural convection, so the frame wants open air above and below it and has no fan filter to service on a shutdown. A cabinet with a blocked vent will simply run hotter than the ambient the unit was rated for.
Motion over EtherNet/IP
Control is integrated motion over EtherNet/IP, CIP Motion. Position loops close in the controller, and the drive follows commands across the same cable that carries configuration and diagnostics. Two Ethernet ports let the unit sit in a line without an external switch, which trims panel space in a small cell, and the mini USB port covers local access when the machine network is not yet live. Vertical mounting is the specified orientation, so keep the plane the mounting plate was drilled for.
Enclosure, temperature and delivery
The housing is open style, IP20: fingers are protected, dust and coolant mist are not, and the cabinet does that work. Operating range is 0 to 50 °C (32 to 122 °F), with storage from -40 to 85 °C (-40 to 185 °F), so a unit that sat in an unheated store is still inside its limits. Certification is CE and cULus, origin is the USA, and stock is held.Each VersaView unit passes a functional check before dispatch, and holds a 12 month warranty.
| Catalog number | 2198-E4030-ERS |
| Manufacturer | Allen-Bradley |
| Product family | Kinetix servo drive |
| Product type | AC Drive |
| Input Voltage | 380/480 Volts AC |
| Mounting Orientation | Vertical |
| Output Power | 3 Kilowatts |
| Dual-Ethernet | Yes |
| Mini USB | Yes |
| Weight | 4.5 kilograms |
| Cooling Method | Natural Convection |
| Control Power Voltage | 24 Volts DC |
| Heat Dissipation at 480 Volts AC | 220 Watts |
| Control | Integrated motion over EtherNet/IP (CIP Motion) |
| Enclosure rating | Open style, IP20 |
| Operating temperature | 0 to 50 °C (32 to 122 °F) |
| Storage temperature | -40 to 85 °C (-40 to 185 °F) |
| Certifications | CE, cULus |
| Condition | Tested and cleaned, in good working order |
| Warranty | 12 months |
| Place of origin | Made in USA |
| Stock status | In stock |













