CPU 1513F-1 PN – SIEMENS SIMATIC S7-1500 Fail-safe CPUs

CPU 1513F-1 PNCPU 1513F-1 PN

  • The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the S7-1500 controller product range
  • Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
  • High processing speed for binary and floating-point arithmetic
  • Used as central controller in production lines with central and distributed I/O
  • Supports PROFIsafe in centralized and distributed configuration
  • PROFINET IO IRT interface with 2-port switch
  • PROFINET IO Controller for operating distributed I/O on PROFINET
  • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
  • Isochronous mode

Note:
SIMATIC memory card required for operation of the CPU

Application

The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO Controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

Product No. / Product Description

SIMATIC S7-1500 CPU 1513F-1 PN Ordering data

6ES7513-1FL01-0AB0
SIMATIC S7-1500F, CPU 1513F-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 450 KB FOR PROGRAM AND 1.5 MB FOR DATA, 1. INTERFACE: PROFINET IRT WITH 2 PORT SWITCH, 40 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY

Design

The CPU 1513F-1 PN has:

  • a powerful processor:
    The CPU achieves a command execution time as low as 40 ns per binary command.
  • extensive RAM:
    450 KB for program, 1.5 MB for data
  • SIMATIC Memory Cards as load memory;
    permit additional functions such as Datalog and Archive Flexible
  • Expansion capability:
    single-tier configuration with max. 32 modules (CPU + 31 modules)
  • Display with functions for the
    • Display of overview information such as station name, higher level designation, location designation, etc.
    • Display of diagnostic information
    • Display of module information
    • Display of display settings
    • Setting of IP addresses
    • Setting of date and time
    • Selection of the operating mode
    • Resetting of the CPU to factory settings
    • Disabling/enabling of the display
    • Enabling of protection levels
    • Display of safety mode, overall signature and date of the last download with signature change.
  • PROFINET IO IRT interface for connecting distributed I/O via PROFINET
  • Supports PROFIsafe in centralized and distributed configuration
CPU 1513F-1 PN

Function

  • Performance
    • Faster command processing, depending on the CPU type, language extensions and new data types
    • Even shorter response times of the CPUs due to considerably faster backplane bus
    • Powerful network connection:
      each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
  • Integrated technology
    • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
    • Support of speed-controlled and positioning axes as well as external encoders
    • Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
    • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
  • Security Integrated
    • Password-based know-how protection against unauthorized reading and modification of program blocks
    • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
    • 4-level authorization concept:
      Communication to the HMI devices can also be restricted.
    • Manipulation protection:
      The controller recognizes changed or unauthorized transmissions of the engineering data.
  • Design and handling
    • Display of overview information:
      E.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
    • Possible operations on the display:
      set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
  • Integrated system diagnostics
    • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
    • Integrated in the firmware of the CPU, no special configuration is required
  • SIMATIC Memory Card (required for operation of the CPU)
    • Used as plug-in load memory or for updating the firmware.
    • Additionally for storing additional documents or csv files (for recipes and archives)
    • Creation of data blocks for storage/reading of data via SFCs of the user program
  • Datalog (archives) and recipes
    • Storage of csv files for recipes and archives on the SIMATIC Memory Card;
      easy access to plant-relevant operating data using Office tools or via a Web server
    • Easy access to configuration data of the machine by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
  • Programming of the standard program section
    • Programming with STEP 7 V12 SP1
  • Programming of the failsafe program section
    • Programming of the safety-related program section with the option package “STEP 7 Safety Advanced”. STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

CPU 1513F-1 PN Technical specifications

Article number

6ES7513-1FL01-0AB0

CPU 1513F-1 PN, 450KB PROG, 1,5MB DATA

General information

Product type designation

CPU 1513F-1 PN

Firmware version

V2.0

Engineering with

  • ● STEP 7 TIA Portal configurable/integrated as of version

V14

Configuration control

via dataset

Yes

Display

Screen diagonal [cm]

3.45 cm

Control elements

Number of keys

6

Mode selector switch

1

Supply voltage

Type of supply voltage

24 V DC

permissible range, lower limit (DC)

19.2 V

permissible range, upper limit (DC)

28.8 V

Reverse polarity protection

Yes

Input current

Current consumption (rated value)

0.7 A

Inrush current, max.

1.9 A; Rated value

I²t

0.34 A²·s

Power

Infeed power to the backplane bus

10 W

Power consumption from the backplane bus (balanced)

5.5 W

Power loss

Power loss, typ.

5.7 W

Memory

Number of slots for SIMATIC memory card

1

SIMATIC memory card required

Yes

Work memory

  • ● integrated (for program)

450 kbyte

  • ● integrated (for data)

1.5 Mbyte

Load memory

  • ● Plug-in (SIMATIC Memory Card), max.

32 Gbyte

Backup

  • ● maintenance-free

Yes

CPU processing times

for bit operations, typ.

40 ns

for word operations, typ.

48 ns

for fixed point arithmetic, typ.

64 ns

for floating point arithmetic, typ.

256 ns

CPU-blocks

Number of elements (total)

2 000; Blocks (OB, FB, FC, DB) and UDTs

DB

  • ● Number range

1 … 60 999; subdivided into: number range that can be used by the user: 1 … 59 999, and number range of DBs created via SFC 86: 60 000 … 60 999

  • ● Size, max.

1.5 Mbyte; For non-optimized block accesses, the max. size of the DB is 64 KB

FB

  • ● Number range

0 … 65 535

  • ● Size, max.

450 kbyte

FC

  • ● Number range

0 … 65 535

  • ● Size, max.

450 kbyte

OB

  • ● Size, max.

450 kbyte

  • ● Number of free cycle OBs

100

  • ● Number of time alarm OBs

20

  • ● Number of delay alarm OBs

20

  • ● Number of cyclic interrupt OBs

20

  • ● Number of process alarm OBs

50

  • ● Number of DPV1 alarm OBs

3

  • ● Number of isochronous mode OBs

1

  • ● Number of technology synchronous alarm OBs

2

  • ● Number of startup OBs

100

  • ● Number of asynchronous error OBs

4

  • ● Number of synchronous error OBs

2

  • ● Number of diagnostic alarm OBs

1

Nesting depth

  • ● per priority class

24; Up to 8 possible for F-blocks

Counters, timers and their retentivity

S7 counter

  • ● Number

2 048

Retentivity

  • — adjustable

Yes

IEC counter

  • ● Number

Any (only limited by the main memory)

Retentivity

  • — adjustable

Yes

S7 times

  • ● Number

2 048

Retentivity

  • — adjustable

Yes

IEC timer

  • ● Number

Any (only limited by the main memory)

Retentivity

  • — adjustable

Yes

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.

128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB

Flag

  • ● Number, max.

16 kbyte

  • ● Number of clock memories

8; 8 clock memory bits, grouped into one clock memory byte

Data blocks

  • ● Retentivity adjustable

Yes

  • ● Retentivity preset

No

Local data

  • ● per priority class, max.

64 kbyte; max. 16 KB per block

Address area

Number of IO modules

2 048; max. number of modules / submodules

I/O address area

  • ● Inputs

32 kbyte; All inputs are in the process image

  • ● Outputs

32 kbyte; All outputs are in the process image

per integrated IO subsystem

  • — Inputs (volume)

8 kbyte

  • — Outputs (volume)

8 kbyte

per CM/CP

  • — Inputs (volume)

8 kbyte

  • — Outputs (volume)

8 kbyte

Subprocess images

  • ● Number of subprocess images, max.

32

Hardware configuration

Number of distributed IO systems

32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)

Number of DP masters

  • ● Via CM

6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total

Number of IO Controllers

  • ● integrated

1

  • ● Via CM

6; A maximum of 6 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total

Rack

  • ● Modules per rack, max.

32; CPU + 31 modules

  • ● Number of lines, max.

1

PtP CM

  • ● Number of PtP CMs

the number of connectable PtP CMs is only limited by the number of available slots

Time of day

Clock

  • ● Type

Hardware clock

  • ● Backup time

6 wk; At 40 °C ambient temperature, typically

  • ● Deviation per day, max.

10 s; Typ.: 2 s

Operating hours counter

  • ● Number

16

Clock synchronization

  • ● supported

Yes

  • ● in AS, master

Yes

  • ● in AS, slave

Yes

  • ● on Ethernet via NTP

Yes

Interfaces

Number of PROFINET interfaces

1

1. Interface

Interface types

  • ● Number of ports

2

  • ● integrated switch

Yes

  • ● RJ 45 (Ethernet)

Yes; X1

Functionality

  • ● PROFINET IO Controller

Yes

  • ● PROFINET IO Device

Yes

  • ● SIMATIC communication

Yes

  • ● Open IE communication

Yes

  • ● Web server

Yes

  • ● Media redundancy

Yes

PROFINET IO Controller

Services

  • — PG/OP communication

Yes

  • — S7 routing

Yes

  • — Isochronous mode

Yes

  • — Open IE communication

Yes

  • — IRT

Yes

  • — MRP

Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50

  • — MRPD

Yes; Requirement: IRT

  • — Prioritized startup

Yes; Max. 32 PROFINET devices

  • — Number of connectable IO Devices, max.

128

  • — Of which IO devices with IRT, max.

64

  • — Number of connectable IO Devices for RT, max.

128

  • — of which in line, max.

128

  • — Number of IO Devices that can be simultaneously activated/deactivated, max.

8; in total across all interfaces

  • — Number of IO Devices per tool, max.

8

  • — Updating times

The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data

Update time for IRT

  • — for send cycle of 250 µs

250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive

  • — for send cycle of 500 µs

500 µs to 8 ms

  • — for send cycle of 1 ms

1 ms to 16 ms

  • — for send cycle of 2 ms

2 ms to 32 ms

  • — for send cycle of 4 ms

4 ms to 64 ms

  • — With IRT and parameterization of “odd” send cycles

Update time = set “odd” send clock (any multiple of 125 µs: 375 µs, 625 µs … 3 875 µs)

Update time for RT

  • — for send cycle of 250 µs

250 µs to 128 ms

  • — for send cycle of 500 µs

500 µs to 256 ms

  • — for send cycle of 1 ms

1 ms to 512 ms

  • — for send cycle of 2 ms

2 ms to 512 ms

  • — for send cycle of 4 ms

4 ms to 512 ms

PROFINET IO Device

Services

  • — PG/OP communication

Yes

  • — S7 routing

Yes

  • — Isochronous mode

No

  • — Open IE communication

Yes

  • — IRT

Yes

  • — MRP

Yes

  • — MRPD

Yes; Requirement: IRT

  • — PROFIenergy

Yes

  • — Shared device

Yes

  • — Number of IO Controllers with shared device, max.

4

Interface types

RJ 45 (Ethernet)

  • ● 100 Mbps

Yes

  • ● Autonegotiation

Yes

  • ● Autocrossing

Yes

  • ● Industrial Ethernet status LED

Yes

Protocols

Number of connections

  • ● Number of connections, max.

128; via integrated interfaces of the CPU and connected CPs / CMs

  • ● Number of connections reserved for ES/HMI/web

10

  • ● Number of connections via integrated interfaces

88

  • ● Number of S7 routing paths

16

PROFINET IO Controller

Services

  • — PG/OP communication

Yes

  • — S7 routing

Yes

  • — Isochronous mode

Yes

  • — Open IE communication

Yes

  • — IRT

Yes

  • — MRP

Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50

  • — MRPD

Yes; Requirement: IRT

  • — PROFIenergy

Yes

  • — Prioritized startup

Yes; Max. 32 PROFINET devices

  • — Number of connectable IO Devices, max.

128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET

  • — Of which IO devices with IRT, max.

64

  • — Number of connectable IO Devices for RT, max.

128

  • — of which in line, max.

128

  • — Number of IO Devices that can be simultaneously activated/deactivated, max.

8; in total across all interfaces

  • — Number of IO Devices per tool, max.

8

  • — Updating times

The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data

SIMATIC communication

  • ● S7 communication, as server

Yes

  • ● S7 communication, as client

Yes

  • ● User data per job, max.

See online help (S7 communication, user data size)

Open IE communication

  • ● TCP/IP

Yes

  • — Data length, max.

64 kbyte

  • — several passive connections per port, supported

Yes

  • ● ISO-on-TCP (RFC1006)

Yes

  • — Data length, max.

64 kbyte

  • ● UDP

Yes

  • — Data length, max.

1 472 byte

  • ● DHCP

No

  • ● SNMP

Yes

  • ● DCP

Yes

  • ● LLDP

Yes

Web server

  • ● HTTP

Yes; Standard and user-defined pages

  • ● HTTPS

Yes; Standard and user-defined pages

OPC UA

  • ● OPC UA Server

Yes; Data access (read, write, subscribe), runtime license required

  • — Application authentication

Yes

  • — Security policies

Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256

  • — User authentication

“anonymous” or by user name & password

Further protocols

  • ● MODBUS

Yes; MODBUS TCP

Media redundancy

  • ● Switchover time on line break, typ.

200 ms

  • ● Number of stations in the ring, max.

50

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes; With minimum OB 6x cycle of 500 µs

Equidistance

Yes

S7 message functions

Number of login stations for message functions, max.

32

Program alarms

Yes

Number of configurable program alarms

5 000

Number of simultaneously active program alarms

  • ● Number of program alarms

290

  • ● Number of alarms for system diagnostics

100

  • ● Number of alarms for motion technology objects

80

Test commissioning functions

Joint commission (Team Engineering)

Yes; Parallel online access possible for up to 5 engineering systems

Status block

Yes; Up to 8 simultaneously (in total across all ES clients)

Single step

No

Status/control

  • ● Status/control variable

Yes

  • ● Variables

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

  • ● Number of variables, max.

  • — of which status variables, max.

200; per job

  • — of which control variables, max.

200; per job

Forcing

  • ● Forcing, variables

Peripheral inputs/outputs

  • ● Number of variables, max.

200

Diagnostic buffer

  • ● present

Yes

  • ● Number of entries, max.

1 000

  • — of which powerfail-proof

500

Traces

  • ● Number of configurable Traces

4; Up to 512 KB of data per trace are possible

Interrupts/diagnostics/status information

Diagnostics indication LED

  • ● RUN/STOP LED

Yes

  • ● ERROR LED

Yes

  • ● MAINT LED

Yes

  • ● Connection display LINK TX/RX

Yes

Supported technology objects

Motion Control

Yes

  • ● Speed-controlled axis

  • — Number of speed-controlled axes, max.

6; Requirement: There must be no other motion technology objects created

  • ● Positioning axis

  • — Number of positioning axes, max.

6; Requirement: There must be no other motion technology objects created

  • ● Synchronized axes (relative gear synchronization)

  • — Number of axes, max.

3; Requirement: There must be no other motion technology objects created

  • ● External encoders

  • — Number of external encoders, max.

6; Requirement: There must be no other motion technology objects created

Controller

  • ● PID_Compact

Yes; Universal PID controller with integrated optimization

  • ● PID_3Step

Yes; PID controller with integrated optimization for valves

  • ● PID-Temp

Yes; PID controller with integrated optimization for temperature

Counting and measuring

  • ● High-speed counter

Yes

Highest safety class achievable in safety mode

Probability of failure (for service life of 20 years and repair time of 100 hours)

  • — Low demand mode: PFDavg in accordance with SIL3

< 2.00E-05

  • — High demand/continuous mode: PFH in accordance with SIL3

< 1.00E-09

Ambient conditions

Ambient temperature during operation

  • ● horizontal installation, min.

0 °C

  • ● horizontal installation, max.

60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off

  • ● vertical installation, min.

0 °C

  • ● vertical installation, max.

40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off

Ambient temperature during storage/transportation

  • ● min.

-40 °C

  • ● max.

70 °C

Configuration

Programming

Programming language

  • — LAD

Yes; incl. failsafe

  • — FBD

Yes; incl. failsafe

  • — STL

Yes

  • — SCL

Yes

  • — GRAPH

Yes

Know-how protection

  • ● User program protection/password protection

Yes

  • ● Copy protection

Yes

  • ● Block protection

Yes

Access protection

  • ● Password for display

Yes

  • ● Protection level: Write protection

Yes; Specific write protection both for Standard and for Failsafe

  • ● Protection level: Read/write protection

Yes

  • ● Protection level: Complete protection

Yes

Cycle time monitoring

  • ● lower limit

adjustable minimum cycle time

  • ● upper limit

adjustable maximum cycle time

Dimensions

Width

35 mm

Height

147 mm

Depth

129 mm

Weights

Weight, approx.

430 g