Rosemount 304 Conventional Manifold

Engineered for 2-, 3- and 5-valve configurations, the Rosemount 304 Conventional Manifold attaches to a transmitter with a traditional or coplanar flange. This manifold is available in traditional and wafer styles and is factory-assembled to transmitters, leak-tested and calibrated for quick installation. Designed for multivariable, static and differential pressure transmitters, this manifold allows instrument isolation, controlled venting and protection from leaking to ensure measurement integrity.

Rosemount 304 Specifications

Maximum Operating Temperature:1000°F (538°C)
Manifold Material:316 SST/316L SST, Carbon Steel
Packing Material:PTFE, Graphite-based
Process Connections:1/2″-14 female NPT, IEC 61518
Process Connection Orientation:Parallel transmitter, 90° transmitter
Certifications:Cleaning for special services, sour gas (meets NACE MR 0175/ISO 15156, MR0103), see full specs for complete list of certifications
Warranty:Up to 5-year limited warranty
Process Connection Orientation:Parallel transmitter, 90° transmitter
Certifications:Cleaning for special services, sour gas (meets NACE MR 0175/ISO 15156, MR0103), see full specs for complete list of certifications
Warranty:Up to 5-year limited warranty

Rosemount 304 Features

  • Assembles to transmitter flange in accordance with IEC 61518
  • Traditional (Flange x Flange and Flange x NPT) and wafer manifold styles meet a wide range of applications
  • 2-,3- and 5-valve configuration for assembly to multi-variable, absolute, gage and differential pressure transmitters
  • Manifold can be factory-assembled to a transmitter, leak-tested and calibrated for quick installation
  • 5-valve natural gas configuration available for extra protection from leaking to ensure DP signal integrity

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

ROSEMOUNT 5300 SERIES – TEST and MEASUREMENT

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

Yokogawa EJA120A Draft Range Differential Pressure Transmitter

Load more