SIEMENS Controllers LOGO!Power 1-phase, 5 V DC

Thanks to its stepped profile design, the LOGO!Power product family is ideally suited for low installation depths, such as in miniature distribution boards. The stabilized power supplies with a wide range input of 100 … 240 V AC (85 … 264 V) and 110 … 300 V DC are available with an output voltage of 5 V in two performance classes. The high level of efficiency across the entire load range as well as the low no-load losses result in lower overall energy consumption. Greater convenience when commissioning and servicing thanks to the integrated current monitor. The extended temperature range from -25 °C to +70 °C enables a host of additional applications.

Main product highlights
  • 5 V DC / 3 A and 6.3 A
  • Narrow unit with 36 mm or 54 mm width and overall depth of 53 mm in LOGO! design
  • Flexible mounting: Standard rail or wall mounting in a range of installation positions
  • Higher energy efficiency: over the entire load range as well as no-load power losses of < 0.3 W
  • Integrated current monitor: Actual output current measurement directly at the power supply unit
  • Global use: Operating temperature range from -25 °C to +70 °C as well as international certifications such as UL, CSA, FM or ATEX

SIEMENS LOGO!Power 1-phase, 5 V DC

Product No. / Product DescriptionListprice / Your price
6EP3310-6SB00-0AY0
LOGO!POWER 5 V / 3 A stabilized power supply input: 100-240 V AC output: 5 V / 3 A DC
6EP3311-6SB00-0AY0
LOGO!POWER 5 V / 6.3 A stabilized power supply input: 100-240 V AC output: 5 V / 6.3 A DC

LOGO!Power 1-phase, 5 V DC Technical specifications

Article number

6EP3310-6SB00-0AY0

6EP3311-6SB00-0AY0

Product

LOGO!Power

LOGO!Power

Power supply, type

5 V/3 A

5 V/6.3 A

Input

Input

1-phase AC or DC

1-phase AC or DC

Rated voltage value Vin rated

100 … 240 V

100 … 240 V

Voltage range AC

85 … 264 V

85 … 264 V

Input voltage

  • ● at DC

110 … 300 V

110 … 300 V

Wide-range input

Yes

Yes

Mains buffering at Iout rated, min.

40 ms; at Vin = 187 V

40 ms; at Vin = 187 V

Rated line frequency 1

50 Hz

50 Hz

Rated line frequency 2

60 Hz

60 Hz

Rated line range

47 … 63 Hz

47 … 63 Hz

Input current

  • ● at rated input voltage 120 V

0.36 A

0.71 A

  • ● at rated input voltage 230 V

0.22 A

0.37 A

Switch-on current limiting (+25 °C), max.

26 A

50 A

I²t, max.

0.8 A²·s

3 A²·s

Built-in incoming fuse

internal

internal

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C

Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C

Output

Output

Controlled, isolated DC voltage

Controlled, isolated DC voltage

Rated voltage Vout DC

5 V

5 V

Total tolerance, static ±

3 %

3 %

Static mains compensation, approx.

0.1 %

0.1 %

Static load balancing, approx.

0.1 %

0.1 %

Residual ripple peak-peak, max.

100 mV

100 mV

Residual ripple peak-peak, typ.

30 mV

30 mV

Spikes peak-peak, max. (bandwidth: 20 MHz)

100 mV

100 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz)

50 mV

50 mV

Adjustment range

4.6 … 5.4 V

4.6 … 5.4 V

Product function Output voltage adjustable

Yes

Yes

Output voltage setting

via potentiometer

via potentiometer

Status display

Green LED for output voltage OK

Green LED for output voltage OK

On/off behavior

No overshoot of Vout (soft start)

No overshoot of Vout (soft start)

Startup delay, max.

0.5 s

0.5 s

Voltage rise, typ.

100 ms

100 ms

Rated current value Iout rated

3 A

6.3 A

Current range

0 … 3 A

0 … 6.3 A

  • ● Note

+55 … +70 °C: Derating 2%/K

+55 … +70 °C: Derating 2%/K

Supplied active power typical

15 W

31.5 W

Parallel switching for enhanced performance

Yes

Yes

Numbers of parallel switchable units for enhanced performance

2

2

Efficiency

Efficiency at Vout rated, Iout rated, approx.

76 %

80 %

Power loss at Vout rated, Iout rated, approx.

5 W

8 W

Power loss [W] during no-load operation maximum

0.3 W

0.3 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max.

0.2 %

0.2 %

Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.

5 %

7 %

Load step setting time 10 to 90%, typ.

1 ms

1 ms

Load step setting time 90 to 10%, typ.

1 ms

1 ms

Protection and monitoring

Output overvoltage protection

Yes, according to EN 60950-1

Yes, according to EN 60950-1

Current limitation, typ.

3.8 A

8.2 A

Property of the output Short-circuit proof

Yes

Yes

Short-circuit protection

Constant current characteristic

Constant current characteristic

Enduring short circuit current RMS value

  • ● maximum

3.8 A

8.2 A

Overload/short-circuit indicator

Safety

Primary/secondary isolation

Yes

Yes

Galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

Protection class

Class II (without protective conductor)

Class II (without protective conductor)

CE mark

Yes

Yes

UL/cUL (CSA) approval

cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)

cULus-listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-recognized (UL 60950, CSA C22.2 No. 60950), File E151273

Explosion protection

ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4

ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4

FM approval

Class I, Div. 2, Group ABCD, T4

Class I, Div. 2, Group ABCD, T4

CB approval

Yes

Yes

Marine approval

GL and ABS in process

GL and ABS in process

Degree of protection (EN 60529)

IP20

IP20

EMC

Emitted interference

EN 55022 Class B

EN 55022 Class B

Supply harmonics limitation

not applicable

not applicable

Noise immunity

EN 61000-6-2

EN 61000-6-2

Operating data

Ambient temperature

  • ● during operation

-25 … +70 °C

-25 … +70 °C

  • — Note

with natural convection

with natural convection

  • ● during transport

-40 … +85 °C

-40 … +85 °C

  • ● during storage

-40 … +85 °C

-40 … +85 °C

Humidity class according to EN 60721

Climate class 3K3, no condensation

Climate class 3K3, no condensation

Mechanics

Connection technology

screw-type terminals

screw-type terminals

Connections

  • ● Supply input

L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded

L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded

  • ● Output

+, -: 2 screw terminals each for 0.5 … 2.5 mm²

+, -: 2 screw terminals each for 0.5 … 2.5 mm²

  • ● Auxiliary

Width of the enclosure

36 mm

54 mm

Height of the enclosure

90 mm

90 mm

Depth of the enclosure

53 mm

53 mm

Required spacing

  • ● top

20 mm

20 mm

  • ● bottom

20 mm

20 mm

  • ● left

0 mm

0 mm

  • ● right

0 mm

0 mm

Weight, approx.

0.12 kg

0.2 kg

Product feature of the enclosure housing for side-by-side mounting

Yes

Yes

Installation

Snaps onto DIN rail EN 60715 35×15, various direct mounting positions

Snaps onto DIN rail EN 60715 35×15, various direct mounting positions

MTBF at 40 °C

2 931 709 h

2 654 280 h

Other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Popular Products Series

Siemens Simatic S7-200 CN

Siemens Simatic S7-200 CN are Made in China. MFG is Siemens China…

SIEMENS SINAMICS G130 Chassis Units

SINAMICS G130 chassis units have been designed for variable-speed drives in machine building and plant construction.
They have been specially tuned to the requirements of drives with quadratic or constant load characteristics with medium performance requirements without regenerative feedback.

GE QuickPanel family of Human Machine Interfaces Ge Fanuc HMI

The GE Automation QuickPanel+ HMI is more than just a human-machine interface; streamline your system with an OI/HMI, PLC/process controller, machine gateway, and data historian capable device all-in-one. It is made to handle industrial environments and is as easy to use as a smart phone or tablet, with just the swipe or tap of a finger.

Mitsubishi F740 Series Frequency Inverter

The FR-F700 Series was launched in 2004 as the successor to the FR-F500 Series VFD. With growing market demands for energy saving inverters in building automation, water processing and HVAC industries, the FR-F700 was able to exceed power-saving expectations in fan and pump applications by incorporating “OEC” (optimum excitation control) which combined maximum drive utilization with minimal power consumption.

Siemens PLC spare part 6AV 6DD 6SN 6ES5 6ES7

Main supply Siemens 6ES7 6AV6 6AV3 6SE7 Spare parts...

6RM80 SINAMICS DCM Cabinets

We provide the assembled version of 6RM80 product, and all the accessories are from the official Siemens, which are 100% tested and strictly tested before delivery.
Please consult our sales department for price.

Allen-Bradley 6176M Standard Industrial Monitors

Allen-Bradley 6176M Standard Industrial Monitors,6176M Standard Monitors are flat panel industrial color monitors for use in less demanding environments. All Standard Monitors have USB and RS232 touch screen inputs, DVI and VGA video inputs, and an On Screen Display (OSD) that enables image rotation, color pallet changes, and push button auto reset.

Allen-Bradley 6186M Performance Monitors

Bulletin 6186M - Performance Industrial Monitors




1200M,…
Load more