SIEMENS Industrial PCs – SIMATIC IPC277E 19″ INOX PRO Panel PC

Configured Nanopanel PC in fully-enclosed stainless steel housing with high degree of protection for machine-level operation and monitoring in the food and beverage, pharmaceutical and fine chemicals industries and in other areas of hygiene.

The device has been developed on the basis of EN 1672-2 “Food processing machinery – Safety and hygiene requirements”.

With its fully enclosed design and optional expansion modules, the SIMATIC PRO devices are eminently suitable for industrial and machine-level use.

The INOX PRO devices feature stainless steel housing and a compact, hygienic design, and are equipped to meet the high requirements presented by the food and beverage production environment. IP66K degree of protection protects against water, even with a jet strength of 100 l/min at 10 bar from a distance of 2.5 m to 3 m.

The optimized profile and minimal housing depth allow liquids to run off.

The high quality requirements in the food and beverages industry demand a high standard of the food processing machinery. There are many relevant regulations, directives, ordinances, standards and laws. Essential here is that all equipment and components are easy to clean and disinfect.

The INOX PRO devices with stainless steel front have a 240 grit hairline finish, and are thus suitably smooth to allow micro-organisms to be sufficiently removed during cleaning.
On the front, the membrane covering the display cutout is tested with regard to its resistance to chemicals, has minimal grooves and gaps in which micro-organisms could settle, and also provides shatter protection for the display. The rear covers have an innovative sealing design with replaceable compression seals. This prevents liquids from seeping through.

Our Main Business on SIEMENS Panel PC :SIMATIC IPC277E,SIMATIC IPC277E 19″ INOX PRO,SIMATIC IPC277D,SIMATIC IPC377E,SIMATIC IPC477E,SIMATIC IPC477D,SIMATIC IPC477D PRO,SIMATIC IPC677D,SIMATIC HMI Panel PC Ex,SIMATIC HMI Panel PC Ex OG,…All the Siemens IPC we sell Made in Germany! 100% Original!

SIMATIC IPC277E 19″ INOX PRO Product No./Description

Product No. / Product DescriptionListprice / Your price
6AV7484-5AB00-0AA0
SIMATIC IPC277E (Nanopanel PC), 19″ touch TFT, cont. foil, INOX housing, all around IP66, flange adaption for stand, w/o operating elements w/o front USB; 2 X 10/100/1000 Mbit/s, ETHERNET RJ45; 1x USB 3.0, 3x USB V2.0; w/o serial (COM1); CFAST- Slot; 24V DC power supply; Celeron N2930 (4C/4T), 8GB RAM; 8 GB CFAST; WES 7 SP1 english, 64 Bit; W/O SIMATIC Software;
6AV7484-5AB10-0AA0
SIMATIC IPC277E (NANOPANEL PC), 19″ TOUCH TFT, CONT. FOIL, INOX housing, all around IP66, flange adaption for arm, w/o operating elements w/o front USB; 2 X 10/100/1000 Mbit/s, Ethernet RJ45; 1x USB 3.0, 3x USB V2.0; w/o serial (COM1); CFAST- Slot; 24V DC power supply; Celeron N2930 (4C/4T), 8GB RAM; 8 GB CFAST; WES 7 SP1 english, 64 Bit; W/O SIMATIC Software;

Benefits

The INOX PRO device can be mounted either with a supporting arm or supporting foot.

  • Proven hygienic design for easy cleaning and disinfection
  • High, fully-enclosed IP66K for increased tightness and ruggedness
  • Food-standard sealing material and shatter protection for the display to prevent contamination of foodstuffs
  • Flat, optimized hygienic design allows liquids to run off
  • Same functionality as the comparably configured standard product
  • Small footprint thanks to compact, enclosed design.
  • Without preinstalled operator controls
  • Flexible implementation due to optional pedestal or support-arm mounting
  • Quick access to interfaces by means of the removable connection cover
  • Mounting kit with tube with 40 mm inside diameter permits connection to a wide range of accessories

ApplicationSIMATIC IPC277E 19

  • Food production
  • Slaughterhouse
  • Secondary packaging/cartoning, filling
  • Primary packaging
  • Pharmaceutical and cosmetics industry
  • Chemical industry
  • Life sciences

Design

  • TFT widescreen display
  • Analog-resistive touch screen sensor
  • Stainless steel surface ground with 240 grit hairline finish
  • Device developed on the basis of DIN EN 1672-2
  • Resistant, decorative membrane tested against chemicals in accordance with DIN 42115, Part 2
  • Food-standard flat seal in accordance with FDA 21 CFR 177.2600
  • Housing material:
    INOX stainless steel, material number 1.4301
  • Food-standard sealing material:
    FPM (Fluoroelastomer)
  • Continuous front membrane
  • Degree of protection:
    Fully-enclosed IP66K
  • Without front operator controls
  • Mechanical interface:
    For pedestal or support-arm mounting
  • Service cover for access to the interfaces, cable routing through the support system

SIMATIC IPC277E 19″ INOX PRO Technical specifications

IPC277E 19″ INOX PRO

Special features

Pedestal mounting

Support arm mounting

General features

Display

18.5″ TFT widescreen display

18.5″ TFT widescreen display

Resolution (pixels)

1 366 x 768

1 366 x 768

MTBF of backlit display (at 25°C)

50 000 h

50 000 h

Power supply

24 V DC

24 V DC

Equipment

Touch

Analog-resistive touch

Analog-resistive touch

Option

External, USB interface on rear with captive stainless steel lock

External, USB interface on rear with captive stainless steel lock

Special features

Flange adapter for pedestal

Flange adapter for support arm

Configuration / interfaces

Based on SIMATIC IPC277E,
configured (6AV7882-0EB30-2LA0)

Based on SIMATIC IPC277E,
configured (6AV7882-0EB30-2LA0)

Celeron N2930, 8 GB RAM 8 GB CFAST

Celeron N2930, 8 GB RAM 8 GB CFAST

WES 7 SP1 64-bit, English

WES 7 SP1 64-bit, English

Without RTX/HMI software

Without RTX/HMI software

2 x 10/100/1000 Mbps Ethernet RJ45

2 x 10/100/1000 Mbps Ethernet RJ45

1 x USB 3.0, 2 x USB V2.0; without serial (COM1)

1 x USB 3.0, 2 x USB V2.0; without serial (COM1)

CFAST slot

CFAST slot

Enclosure

Front

Stainless steel 1.4301, polyester-based membrane

Stainless steel 1.4301, polyester-based membrane

Material

Stainless steel 1.4301

Stainless steel 1.4301

Surface

Hairline finish, 240 grit abrasive grain

Hairline finish, 240 grit abrasive grain

Device seals

FPM, molded parts, replaceable

FPM, molded parts, replaceable

Special features

Decorative display membrane; without USB port on front

Decorative display membrane; without USB port on front

Ambient conditions

Degree of protection, fully-enclosed

IP66K, enclosure type 4 and 4x (indoor use only)

IP66K, enclosure type 4 and 4x (indoor use only)

Ambient temperature during operation

0 … +45 °C

0 … +45 °C

Relative humidity during operation

Max. 95 %, no condensation

Max. 95 %, no condensation

Transport temperature / storage temperature / humidity

– 20°C … + 60°C / 10 % to 90 % without condensation

– 20°C … + 60°C / 10 % to 90 % without condensation

Approvals and inspections

CE, UL

Hygiene inspection on the basis of EN 1672-2

CE, UL

Hygiene inspection on the basis of EN 1672-2

Approvals (planned)

RCM (previously C-Tick)/KC/CUL

RCM (previously C-Tick)/KC/CUL

Sector

Food & beverages, pharmaceuticals industry, cosmetics industry, fine chemicals, other hygiene areas

Food & beverages, pharmaceuticals industry, cosmetics industry, fine chemicals, other hygiene areas

Dimensions

External dimensions (W x H x D in mm)

544 x 430.7 x 136

544 x 430.7 x 136

Depth of enclosure only (without flange and operator controls) in mm

80

80

Weight, net

15.5 kg

15.5 kg

Special features

Flange adapter for pedestal

Flange adapter for support arm