SIEMENS LOGO! logic module – SIPLUS LOGO! logic module

SIPLUS LOGO! logic module OverviewSIPLUS LOGO! logic module

  • The controller for use in the toughest environmental conditions
  • With extended temperature range from -40/-25 °C to +70 °C
  • Suitable for exposure to media (harmful gas atmosphere)
  • Condensation permissible
  • With the proven PLC technology of LOGO!
  • Easy to handle, program, maintain, and service
  • Ideal for use in automotive engineering, environmental engineering, mining, chemical plants, material handling, food industry, etc.

Accessories:

  • The front panel mounting set also allows simple and reliable installation of the logic modules in front panels; IP65 protection is thus possible.
  • In order to ensure dependable operation of SIPLUS devices supplied by the battery in conjunction with combustion engines, it is necessary to put in a SIPLUS upmiter upstream device between the battery and the SIPLUS LOGO!.


SIPLUS LOGO! logic module Technical specifications

General technical data of the SIPLUS LOGO!

Ambient temperature range

-40/-25 … +70 °C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

Ambient conditions

Extended range of environmental conditions

  • with reference to ambient temperature, air pressure and altitude

Tmin … Tmax at 1080 hPa … 795 hPa (-1000 m … +2000 m) //
Tmin … (Tmax – 10K) at 795 hPa … 658 hPa (+2000 m … +3500 m) //
Tmin … (Tmax – 20K) at 658 hPa … 540 hPa (+3500 m … +5000 m)

  • At cold restart, min.

0° C

Relative humidity

  • with condensation, max.

100 %; RH incl. bedewing/frost (no commissioning in bedewed state)

Resistance

  • to biologically active substances/compliance with EN 60721-3-3

Yes; Class 3B2 mold and fungal spores (except fauna); the supplied plug covers must remain in place on the unused interfaces during operation.

  • to chemically active substances/compliance with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.

  • to mechanically active substances, compliance with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust; the supplied plug covers must remain in place on unused interfaces during operation.