SIEMENS S7-300 Technology CPUs CPU 317T-3 PN/DP

CPU 317T-3 PN/DPCPU 317T-3 PN/DP

  • SIMATIC CPU with integral technology/motion control functionality
  • With full standard CPU 317-2 PN/DP functionality (except for CBA)
  • For cross-industry automation tasks in series machine, special machine and plant construction
  • Ideal for synchronized motion, such as coupling to a virtual/real master, gear synchronization, cam disk, path interpolation, or print mark compensation
  • 3D path interpolation with different kinematics
  • Position and pressure-regulated hydraulic axes
  • Used as central controller in production lines with central and distributed I/O
  • With integrated I/O for high-speed technology functions (e.g. camming, reference point acquisition)
  • PROFIBUS DP (DRIVE) interface for isochronous connection of drive components
  • PROFINET interface with 2-port switch
  • PROFINET IO controller for operating distributed I/O on PROFINET
  • One common S7 user program for control and motion control tasks (no additional programming language necessary for motion control)
  • “S7 Technology” option package required (version V4.2 SP3 and higher)

SIMATIC Micro Memory Card (8 MB) required for operation of the CPU.

SIEMENS S7-300 CPU 317T-3 PN/DP Ordering data

Product No. / Product DescriptionListprice / Your price
6ES7317-7TK10-0AB0
SIMATIC S7-300, CPU 317T-3 PN/DP, CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY, 1024 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE DP(DRIVE), 3. INTERFACE ETHERNET PROFINET WITH 2 PORT SWITCH, INTEGRATED I/O FOR TECHNOLOGY, FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 8 MB NECESSARY

The CPU 317T-3 PN/DP is used primarily in machines where a control with a large program memory coincides with high processing speed and motion control requirements, e.g.:

  • Processing/assembly lines
  • Carton erectors
  • Palletizers
  • Handling systems
  • Flying shears
  • Bottling plants
  • Wrapping
  • Labeling machines
  • Roll feeds
  • Portals with interpolation

The typical application for motion control functions is for 3-8 axes. The maximum number of axes is 32. Along with accurate single axis positioning, the module is suitable primarily for complex motion sequences such as coupling to form a virtual or actual master, gearing, cam, path interpolation or print mark correction.

The quantitative framework of the CPU 317T-3 PN/DP makes it ideal for the use of SIMATIC Engineering Tools, e.g.:

  • Programming with SCL
  • Machining step programming with S7-GRAPH