SIEMENS SIMATIC S5 PLC Programmable Controllers

SIEMENS SIMATIC S5 PLC

The SIMATIC S5 was successfully used in the process industry and in manufacturing automation as a complete controller family for a wide range of controller tasks. Many SIMATIC S5 control systems are still in reliable service today, but rapid technological changes and increased market demands place stringent requirements on the automation system of today and tomorrow. A migration from SIMATIC S5 controllers to SIMATIC S7 is therefore always a wise decision. However, an upgrade to a DCS might perform better depending on your application. For these circumstances the “Totally Integrated Automation” (TIA) concept of Siemens offers a lot of interesting possibilities.

you may also like

6ES7315-2EH14-0AB0

6AG1315-2AH14-7AB0 SIPLUS S7-300 CPU 315-2DP

/
6AG1315-2AH14-7AB0 SIPLUS S7-300 CPU 315-2DP -25...+70°C with conformal coating based on 6ES7315-2AH14-0AB0 . Central processing unit with MPI Integr. power supply 24 V DC Work memory 256 KB 2nd interface DP master/ slave Micro Memory Card required

6AG1315-2EH14-2AY0 Siemens SIPLUS S7-300 CPU 315-2PN/DP

/
6AG1315-2EH14-2AY0 SIPLUS S7-300 CPU 315-2PN/DP -25...+60°C with conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES7315-2EH14-0AB0 . Central processing unit with 384 KB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

6AG1410-5HX08-7AB0 SIMATIC PCS 7, CPU 410-5H SIPLUS PCS 7 CPU 410-5H

/
6AG1410-5HX08-7AB0 SIPLUS PCS 7 CPU 410-5H -25...+70°C with conformal coating based on 6ES7410-5HX08-0AB0 . Central processing unit for S7-400 and S7-400H/F/FH, 5 interfaces: 1x PN, 1x DP, 2x for Sync modules "and 1x service . ""Only for" "spare parts supply;"" without" System Expansion Card

6AG1331-7NF10-2AB0 SIPLUS S7-300 SM331 Analog input isolated 8AI

/
6AG1331-7NF10-2AB0 SIPLUS S7-300 SM 331 8AI 40-pole -25...+60°C with conformal coating based on 6ES7331-7NF10-0AB0 . Analog "input isolated, ""8 AI; +/-5/10" V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole

6AG1326-2BF41-2AY0 SIPLUS S7-300 SM 326F DO8 24VDC 2A

/
6AG1326-2BF41-2AY0 SIPLUS S7-300 SM 326F DO8 according to EN 50155 T1 Cat 1 Cl A/ B with conformal coating based on 6ES7326-2BF41-0AB0. Digital output F-DO 8x 24 V DC/2A PM fail-safe digital output Sinking-sourcing up to Category 4 (EN 954-1), SIL 3 (IEC 61508)

6AG1326-1BK02-2AB0 SIEMENS SIPLUS S7-300 SM 326F DI24 24VDC

/
SIPLUS S7-300 SM 326F DI24 40-pole -25...+60°C (70°C with forced…

6AG1331-7PF01-4AB0 SIPLUS S7-300 SM 331 8AI 2/3/4-wire

/
SIPLUS S7-300 SM 331 8AI with conformal coating based on 6ES7331-7PF01-0AB0…

6AG1326-1BK02-2AY0 SIPLUS S7-300 SM 326F DI24

/
SIPLUS S7-300 SM 326F DI24 with conformal coating With conformity…

6AG1332-7ND02-4AB0 SIPLUS S7-300 SM332 4AO 4AI

/
SIPLUS S7-300 SM 332 4AO with conformal coating based on 6ES7332-7ND02-0AB0…

SIEMENS SIMATIC S5 PLC Programmable Controllers

The Siemens S5 Driver provides a reliable way to connect Siemens S5 (AS511) devices to client applications;
including HMI, SCADA, Historian, MES, ERP, and countless custom applications. It is intended for use with Siemens S5 PLCs communicating via the front programming port using AS511 protocol (which is specific for each Siemens device). This driver has been designed to operate with a set range of Siemens equipment: it is not recommended for use on devices that are not supported.

Supported Devices
Siemens S5-90U
Siemens S5-95U
Siemens S5-100U-100
Siemens S5-100U-101
Siemens S5-100U-103
Siemens S5-101U
Siemens S5-115U-941
Siemens S5-115U-942
Siemens S5-115U-943
Siemens S5-115U-944
Siemens S5-115U-945
Siemens S5-135U-921
Siemens S5-135U-922
Siemens S5-135U-928
Siemens S5-155U-946
Siemens S5-155U-947
Communication Protocol
AS511 Current Loop

Siemens S5 (AS511) 90U Address Descriptions
The default data types for dynamically defined tags are shown in bold.

Address TypeRangeTypeAccess
Discrete InputsI0.b-I127.b*
IB0-IB127
IW0-IW126
ID0-ID124
Boolean
Byte
Word, Short
DWord,
Long
Read/Write
Read/Write
Read/Write
Read/Write
Discrete Inputs
Note: I and E access the same memory area.
E0.b-E127.b*
EB0-EB127
EW0-EW126
ED0-ED124
Boolean
Byte
Word, Short
DWord,
Long
Read/Write
Read/Write
Read/Write
Read/Write
Discrete OutputsQ0.b-Q127.b*
QB0-QB127
QW0-QW126
Boolean
Byte
Word, Short
Read/Write
Read/Write
Read/Write
Discrete Outputs
Note: Q and A access the same memory area
A0.b-A127.b*
AB0-AB127
AW0-AW126
AD0-AD124
Boolean
Byte
Word, Short
DWord,
Long
Read/Write
Read/Write
Read/Write
Read/Write
Internal MemoryF0.b-F255.b*
FB0-FB255
FW0-FW254
FD0-FD252
Boolean
Byte
Word, Short
DWord,
Long
Boolean
Byte
Word, Short
DWord,
Long
Internal Memory
Note: F and M access the same memory area.
M0.b-M255.b*
MB0-MB255
MW0-MW254
MD0-MD252
Boolean
Byte
Word, Short
DWord,
Long
Read/Write
Read/Write
Read/Write
Read/Write
Data Block
Boolean
DB1-N:KM0.b-KM255.b**
.b is Bit Number 0-15
BooleanRead/Write

Popular Products Series

Mitsubishi F740 Series Frequency Inverter

The FR-F700 Series was launched in 2004 as the successor to the FR-F500 Series VFD. With growing market demands for energy saving inverters in building automation, water processing and HVAC industries, the FR-F700 was able to exceed power-saving expectations in fan and pump applications by incorporating “OEC” (optimum excitation control) which combined maximum drive utilization with minimal power consumption.

Siemens PLC spare part 6AV 6DD 6SN 6ES5 6ES7

Main supply Siemens 6ES7 6AV6 6AV3 6SE7 Spare parts...

Allen-Bradley 6176M Standard Industrial Monitors

Allen-Bradley 6176M Standard Industrial Monitors
6176M Standard Monitors are flat panel industrial color monitors for use in less demanding environments. All Standard Monitors have USB and RS232 touch screen inputs, DVI and VGA video inputs, and an On Screen Display (OSD) that enables image rotation, color pallet changes, and push button auto reset.

Allen-Bradley 6186M Performance Monitors

Simatic S7-200 Smart PLC

SIEMNES SIMATIC S7-200 Smart, newly launched micro PLC Product, is designed to suit the needs of developing markets that are under constant pressure due to price and demands for continuous performance. Providing an excellent performance – to – price ratio, SIMATIC S7 200 SMART when combined with other smart drive products from Siemens helps in building a cost effective yet efficient automation Solution.

ACS800-104/-104LC – inverter module

ACS800-04 – single drive modules

Siemens SIMOVERT MasterDrive Rectifier Regenerative Unit

Load more