SIEMENS SINUMERIK 828D BASIC PPU 241.3 and PPU 240.3

SINUMERIK 828D BASIC PPU 241.3, horizontal

SINUMERIK 828D BASIC PPU 241.3, horizontal

SINUMERIK 828D BASIC PPU 240.3, vertical

SINUMERIK 828D BASIC PPU 240.3, vertical

The SINUMERIK 828D BASIC is an operator-panel CNC which combines all the components of a CNC in one unit:

  • CNC, PLC, HMI
  • 10.4″ TFT color display
  • Full CNC keyboard
  • Closed-loop control for 5 drives

The motors can easily be connected to the digital drive system via DRIVE-CLiQ. In combination with the modular structure of the SINAMICS S120 drive system, this design is conceived to ensure a simple, rugged installation with minimum wiring overhead.

The performance range of the CNC has been precisely selected to meet the requirements of standard turning, milling and grinding machines. Thanks to the technology-specific variants for turning, milling and grinding, the system parameters are already optimized for the machine, making the commissioning process much quicker and easier.

The operator-panel CNC is mounted from the rear using special clamps included in the scope of supply.

Product No. / Product Description

Ordering data

6ES7158-3AD01-0XA0
SIMATIC DP, DISTRIBUTED I/O PN/PN COUPLER COUPLING MODULE FOR CONNECTING TWO PROFINET NETWORKS TRANSFER OF PROFISAFE DATA REDUNDANT POWERSUPPLY
6FC5830-0CY40-0YA8
SINUMERIK 828D SW24x/26x/28x T/M/G TOOLBOX EXPORT SOFTWARE 4.x ON DVD WITHOUT LICENSE
6FC5860-0YC40-0YA8
SINUMERIK 828D/840D sl HMI LANGUAGE EXTENSION DVD1: FOR 840D SL CNC-SW 2.4 SP1, 2.5, 2.6, 2.7, 4.4 SINUMERIK OPERATE SW 2.6, 2.6 SP1, 2.7 DVD2: FOR 828D: SW 2.6, 4.3, 4.4, 4.5 DVD3: FOR 840D sl SW 4.5 SP1, 4.5 SP2 DVD-EDITION 12/13 WITHOUT LIZENZ
6FC5860-7YC00-0YA0
SINUMERIK 828D/840D sl SINUMERIK INTEGRATE Access MyMachine /P2P (MCIS RCS COMMANDER) FOR PC/PG SOFTWARE CURRENT ON CD-ROM WITH LICENSE
6SL3055-0AA00-3BA0
SINAMICS S120 TERMINAL MODULE CABINET TM54F WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS
6SL3070-0AA00-0AG0
SIZER for Siemens Drives Drive Design Tool DVD FOR WINDOWS 7 Ultimate (32/64BIT) WINDOWS 7 ENTERPRISE (32/64BIT) WINDOWS 7 Prof. (32/64BIT) WINDOWS 8.1 Home (32/64BIT) WINDOWS 8.1 ENTERPRISE 32/64BIT WINDOWS 8.1 Prof. (32/64BIT) RELEASE V3.14

Integration

The following components can be connected to the SINUMERIK 828D BASIC PPU 24x.3:

  • 2 electronic handwheels1)
  • Mini handheld unit with handwheel
  • 3 SINUMERIK PP 72/48D PN or PP 72/48D 2/2A PN I/O modules
  • SINUMERIK MCP 310 USB or MCP 483 USB machine control panels
  • SINUMERIK MCP Interface PN
  • GSM/GPRS modem
  • SENTRON PAC power monitoring devices
  • SINAMICS S120 Combi drive system via DRIVE-CLiQ

1) Third handwheel can be connected via MCP Interface PN. Use: Manual machine.

SINUMERIK 828D BASIC PPU 241.3 configuration example with SINAMICS S120 Combi

Configuration

Connection overview for SINUMERIK 828D BASIC PPU 241.3/PPU 240.3

Technical specifications

Article number

 

6FC5370-3AA30-0AA1

6FC5370-4AA30-0AA1

Product brand name

SINUMERIK

SINUMERIK

Product type designation

828D

828D

Performance class for CNC controllers

BASIC

BASIC

Product short term

Wert fehlt!

Wert fehlt!

Product designation

CNC control

CNC control

Design of operator panel

Horizontal

Vertical

Mounting position of operating panel

vertical

vertical

Supply voltage at DC

V

24

24

  • ● Relative negative tolerance at 24 V

%

15

15

  • ● Relative positive tolerance at 24 V

%

20

20

Active power consumption maximum

W

60

60

Buffering time in the event of power failure

ms

3

3

  • ● Note

20 ms mit SITOP smart power supply

20 ms mit SITOP smart power supply

Environmental category acc. to IEC 60721-3-3

Condensation and icing excluded. Low air temperature 0 °C (32 °F).

Condensation and icing excluded. Low air temperature 0 °C (32 °F).

Degree of protection

  • ● front

IP65

IP65

  • — Note

With the front flap closed

With the front flap closed

  • ● rear

IP20

IP20

Relative humidity at 25 °C (77 °F), during

  • ● storage

%

10 … 100

10 … 100

  • ● transport

%

5 … 95

5 … 95

  • ● operation

%

5 … 90

5 … 90

Ambient temperature, during

  • ● storage

°C (°F)

-25 … +55 (-13 … +131)

-25 … +55 (-13 … +131)

  • ● transport

°C (°F)

-20 … +60 (-4 … +140)

-20 … +60 (-4 … +140)

  • ● operation

  • — front

°C (°F)

0 … 45 (32 … 113)

0 … 45 (32 … 113)

  • — rear

°C (°F)

0 … 55 (32 … 131)

0 … 55 (32 … 131)

Width

mm (in)

483 (19.01575)

310 (12.20472)

Height

mm (in)

220 (8.66142)

380 (14.96063)

Depth

mm (in)

105 (4.13386)

105 (4.13386)

Net weight

kg (lb)

4.5 (9.9208)

4.5 (9.9208)

Certificate of suitability

CE, cULus, EAC

CE, cULus, EAC