SIEMENS SINUMERIK Integrate Access MyMachine /P2P

Commissioning support and remote diagnostics with SINUMERIK Operate

SINUMERIK Integrate Access MyMachine /P2P supports the commissioning of machines with SINUMERIK Operate (software version 2.6 and higher) using a standard Windows PC. Its scope of functions includes the exchange of files between the service PC and the control as well as operation of the HMI user interface. EasyScreen texts, alarm texts, tool management texts and other texts can be edited easily.

The file exchange functionality permits access from the NCU to files stored on the CF card and to files in the NCK. Various user profiles are also supported.

The file exchange only requires the Access MyMachine /P2P software. This is installed on the PC (direct access via X127 without a TS adapter does not require the Access MyMachine/P2P option).

If remote access, e.g. via modem, to the HMI user interface is required, the approved modem for this application is the TS Adapter IE (2 versions: analog and ISDN telecommunication networks, only via the X127 service interface) (requires Access MyMachine/P2P option).

Product No. / Product Description Access MyMachine /P2P Ordering data
6ES7842-0CE00-0YE0
SIMATIC S7, TELESERVICE V6.1 FLOATING LICENSE E-SW, SW AND DOCU ON CD LICENSE KEY ON USB-STICK, CLASS A 5 LANGUAGES (G,E,F,I,S) EXECUTABLE UNDER WINXP 32 BIT AND WINDOWS 7 32/64 BIT, REFERENCE-HW: PG/PC
6FC5800-0AP30-0YB0
SINUMERIK 828D 840D SL SINUMERIK INTEGRATE ACCES MYMACHINE /P2P SOFTWARE OPTION DELIVERY OF A LICENSE
6FC5860-7YC00-0YA0
SINUMERIK 828D/840D sl SINUMERIK INTEGRATE Access MyMachine /P2P (MCIS RCS COMMANDER) FOR PC/PG SOFTWARE CURRENT ON CD-ROM WITH LICENSE
6FC5860-7YC43-0YA0
SINUMERIK 840Dsl/828D/808D SINUMERIK INTEGRATE Access MyMachine / P2P (RCS COMMANDER) FOR PC/PG SOFTWARE 4.6 HF1 ON CD-ROM WITH LICENSE

Benefits

Cost savings in service thanks to:

  • Less frequent service calls for the machines
  • More efficient deployment of on-site service personnel
  • Better preparation of service calls

Machine availability is enhanced thanks to:

  • Rapid online presence on site
  • Rapid file transfer to and from the machine

Integration

The components can be connected via X127 (X120/X130 have not been released)

• Point-to-point connection in combination with TS Adapter IE (analog, ISDN modem)

• Ethernet in local networks (LAN)

• Internet (VPN), taking local IT security regulations (IT Policy) into account

Create MyCC

Function

Remote control, monitoring and administration

  • File transfer to CF card and CNC file system
  • Connection is established following confirmation by the operator
  • Status display on the operator panel
  • Optional teleservice software:
    (requires Access MyMachine /P2P option)
    Machine connections can be maintained centrally and access data administered via remote connections.

File functions

Access MyMachine /P2P allows simple file management on your PC and on the SINUMERIK control systems.

  • Data transfer between SINUMERIK and PC, data transfer to CF card and CNC file system.
  • Generation and restoration of images from the CF card of the CNC control for data backup purposes.
  • Writing existing images to a CF card.
  • Loading files directly to the control system and from the CNC control to the PC.

Support during commissioning

  • Managing the CNC data of the CNC control.
  • Files can be copied directly from the PC to the CNC, and from the CNC to the PC.
  • Monitoring processes and remote control of the SINUMERIK via a remote control function.
  • Saving the screenshot of the HMI on the PC.

Presentation of the CNC control and better support in the event of a fault

  • Editing the following user files on the PC:
    • PLC alarm texts (oem_alarms_plc)
    • Cycle alarm texts (oem_alarms_cycles)
    • Part program messages (oem_partprogram_messages)
    • EasyScreen files
    • Tool management texts
    • EasyExtend files (oem_aggregate)
    • Maintenance planner files (oem_maintenance)
  • Creating and loading an archive on the CNC control
  • Managing user files with the following options:
    • Creating a project OFFLINE
    • Creating a project where the files are automatically copied from the CNC control
    • Copying individual files to the CNC control with the project dialog, or copying from the CNC control to the project
    • Deleting user files using the project dialog on the CNC control