SIEMENS SINUMERIK OPERATOR PANEL OP 019 BLACK

SINUMERIK OP 019 black

SINUMERIK OP 019 black


The SINUMERIK OP 019 black operator panel front with 18.5″ TFT color display and 1366 x 768 pixels (widescreen format) enables the distributed installation of the operator panel front and the control. The SINUMERIK OP 019 black operator panel front has a capacitive display area for gesture operation.

The operator panel front is mounted from the rear using special clamps. Installation is assisted by a self-holding mechanism. The clamps are included in the scope of supply.

Product No. / Product Description SINUMERIK OP 019 black Ordering data
6FC5303-0AF17-0AA0
SINUMERIK OPERATOR PANEL OP 019 BLACK, 18,5″ LED MULTITOUCH This product contains items supplied by third parties and may only be resold in conditions where the same protection level applies as under the standard conditions of delivery of Siemens AG for hardware products. If required, Siemens AG can supply these terms and conditions. https://mall.industry.siemens. com/legal/de-en/allgem_ lieferbeding_gl_h36_s0141_ n41_en.pdf

Benefits

  • Clear operator control and monitoring thanks to the 18.5″ TFT color display
  • Capacitive sensor technology for user-friendly operation
  • Optimized for multi-touch operation on the SINUMERIK NCU/PCU
  • High-quality design and high degree of ruggedness
  • Design of flat operator panels through shallow installation depth and low power dissipation
  • Vibration-free mounting of the SINUMERIK PCU in the control cabinet
  • Efficient operation of larger machines using up to 4 additional, distributed operator panels simultaneously

Function

  • Signal transmission between operator panel front and SINUMERIK PCU/NCU via Industrial Ethernet
  • Easy installation assisted by a self-holding mechanism
  • The distance to the operator panel fronts is determined by the maximum distance between two network nodes/access points (100 m/328 ft).

Design

The SINUMERIK OP 019 black operator panel front is linked to the SINUMERIK PCU/NCU via Industrial Ethernet as a Thin Client in a dedicated subnet (via DHCP server).

Interfaces:

  • 3 × USB 2.0 type A (rear)
  • 1 × Industrial Ethernet 10/100/1000 Mbit/s (RJ45 rear socket)

For a USB 2.0 port at the front, a USB extension is available for installation in control desks.

Integration

The SINUMERIK OP 019 black operator panel front can be used for:

  • SINUMERIK 840D sl:
    NCU 710.3B PN/NCU 720.3B PN/NCU 730.3B PN
  • SINUMERIK PCU 50.5 Windows 7

SINUMERIK OP 019 black  Technical specifications

Article number

6FC5303-0AF17-0AA0

Product brand name

SINUMERIK

Product short term

OP 019 black

Product designation

Operator panel front

Screen diagonal

18.5 in

Design of the display

TFT color

Screen resolution of the display

1366 × 768 Pixel

Supply voltage at DC

24 V

Active power consumption

  • ● typical

24 W

  • ● maximum

42 W

Degree of protection

  • ● front

IP65/IP66

  • ● rear

IP20

Environmental category acc. to IEC 60721-3-3

Condensation and icing excluded. Low air temperature 0 °C (32 °F).

Relative humidity at 25 °C (77 °F), during

  • ● storage

5 … 95 %

  • ● transport

5 … 95 %

  • ● operation

5 … 95 %

Ambient temperature, during

  • ● storage

-20 … +55 °C (-4 … +131 °F)

  • ● transport

-40 … +70 °C (-40 … +158 °F)

  • ● operation

  • — front

0 … 45 °C (32 … 113 °F)

  • — rear

0 … 55 °C (32 … 131 °F)

Width

483 mm (19.01575 in)

Height

337 mm (13.26772 in)

Depth

64.9 mm (2.55512 in)

Installation depth

56 mm (2.20472 in)

  • ● Note

Clearance + 64 mm (2.52 in)

Mounting surface

  • ● section width

465 mm (18.30709 in)

  • ● section height

319 mm (12.55906 in)

Net weight

7.6 kg (16.75513 lb)

Certificate of suitability

CE, cULus