SIEMENS SINUMERIK Operator panels SINUMERIK TOP 2200
The SINUMERIK TOP 2200 operator panel front with 21.5″ TFT color display and 1920 × 1080 pixels (widescreen format) enables the distributed installation of the operator panel front and the control. The SINUMERIK TOP 2200 operator panel front has a capacitive display area for gesture operation.
The operator panel front is mounted from the rear using special clamps. The clamps are included in the scope of supply.
Capacitive sensor technology for user-friendly operation
High-quality design and high degree of ruggedness
Design of flat operator panels through shallow installation depth and low power dissipation
Vibration-free mounting of the SINUMERIK PCU/SIMATIC IPC for SINUMERIK in the control cabinet
Efficient operation of larger machines using up to 4 additional, distributed operator panels simultaneously
The SINUMERIK TOP 2200 operator panel front is linked to the PCU/IPC/NCU via Ethernet as a ThinClient in a dedicated subnet (via DHCP server on the PCU/IPC/NCU).
3 × USB 2.0 (rear)
Ethernet 10/100/1000 Mbps
For a USB 2.0 port at the front, a USB extension is available for installation in control desks.
Signal transmission between operator panel front and PCU/IPC/NCU via Industrial Ethernet
Easy installation assisted by a self-holding mechanism
The distance to the operator panel fronts is determined by the maximum distance between two network nodes/access points (100 m).
The SINUMERIK TOP 2200 operator panel front can be used for:
SINUMERIK 840D sl from software version 4.8 SP1:
NCU 710.3B PN/NCU 720.3B PN/NCU 730.3B PN