SIEMENS SINUMERIK PCU 50 566 MHz/1.2 GHz CPU

The innovated SINUMERIK PCU 50 with the more powerful CPUs (566 MHz and 1.2 GHz) and Windows NT 4.0 have been released.

The innovated PCU 50 with 566 MHz replaces the previous PCU 50 with 333 MHz and the innovated PCU 50 with 1.2 GHz, the previous PCU 50 with 500 MHz.
The appropriate mounting brackets for the innovated PCU 50 must be additionally ordered. 

If it is required that the innovated PCU 50 is supplied with the HMI Advanced  operator control software installed on the PCU hard disk, then after the Order No. for the PCU 50, the Order No. for the HMI Advanced software should be specified.

The changeover to the new PCU 50 for SINUMERIK 810D/840D should have been completed by the end of November 2002. From December 2002, for SINUMERIK 810D/840D, generally, only the new PCU 50 with 566 MHz or 1.2 GHz with Windows NT will be available.

Contact us !We have a good prices and excellent service!

Siemens PCU50 Technical data

With the innovated SINUMERIK PCU 50 with higher performance CPUs, there is now an additional USB connection. The additional USB connection will only be able to be used with Windows XP. The additional technical data essentially correspond to the previous components.

Order Nos.

Ordering data

Order No.

Release for gen. availability

PCU 50;566MHz;1x128MB RAM; DC 24V; Windows NT 4.0

6FC5210-0DF20-0AA0

Yes

PCU 50;1,2GHz;1x256MB RAM; DC 24V; Windows NT 4.0

6FC5210-0DF22-0AA0

Yes

.

SOFTWARE HMI ADVANCED FOR PCU
5-LANGUAGE (EN, GE, FR, IT, SP); current SW RELEASE;
INSTALLED ON THE PCU HARD DISK; SINGLE LICENSE

6FC5253-0BX10-0AF0

 Yes

SOFTWARE HMI ADVANCED FOR PCU
5-LANGUAGE (EN, GE, FR, IT, SP); SW RELEASE 6.1;
INSTALLED ON THE PCU HARD DISK; SINGLE LICENSE

6FC5253-6BX10-1AF0

Version 06.01.15

 Yes

SOFTWARE HMI ADVANCED FOR PCU
5 LANGUAGE (EN, GE,FR,IT,SP); SW RELEASE 6.2;
INSTALLED ON THE PCU HARD DISK; SINGLE LICENSE

6FC5253-6BX10-2AF0

Version 06.02.14

Yes

.

Mounting bracket
for a PCU or a video link receiver behind the operator panel front

6FC5248-0AF20-2AA0

Yes

.

256 Mbyte memory expansion, SO-DIMM PC-133
(for PCU 50 with 566 MHz or 1.2 GHz)

6ES7648-2AC20-0CA0
(A5E00135002)

Yes

128 Mbyte memory expansion, SO-DIMM PC-133
(for PCU 50 with 566 MHz or 1.2 GHz)

6ES7648-2AC10-0CA0
(A5E00135001)

Yes

.

Spare part:
Hard disk with support plate and damping mechanism for PCU 50/70

6FC5247-0AF08-0AA1

Yes

Compatibility

The PCU 50 with 333 MHz or 500 MHz  and with Windows NT will be replaced by the PCU 50 with 566 MHz or 1.2 GHz also with Windows NT. In order to use the PCU 50 with 566 MHz or 1.2 GHz, the basic software “PCU 50-Base 07.03.02” is required. This basic software is included in the supply of all of the innovated PCU 50 NT versions.

The PCU 50 with 566 MHz or 1.2 GHz is fully compatible for the application software (HMI-Advanced, ProTool Pro “Option SINUMERIK”, …).

Ghost images, which were generated with a PCU 50 with 333 MHz or 500 MHz can be still used, under specific prerequisites, on the PCU 50 with 566 MHz or 1.2 GHz. Please contact your local Siemens office regarding the retrofit software which is electronically available.