SIEMENS SIPLUS S7-300 analog modules – SIPLUS S7-300 SM 331

SIPLUS S7-300 SM 331 Overview

  • Analog inputs
  • For connecting voltage sensors and current sensors, thermocouples, resistors and resistance thermometersSIPLUS S7-300 SM 331
Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Application

Analog input modules can be used to connect the PLC to analog process signals. They are suitable for the connection of voltage and current sensors, thermocouples, resistors and resistance thermometers.

SIPLUS S7-300 SM 331 Ordering data

Product No. / Product DescriptionListprice / Your price
6AG1331-1KF02-7AB0
SIPLUS S7-300 SM331 8AE -25 … +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7331-1KF02-0AB0 . OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, PTC / KTY, 66 MS MODULE UPDATE, 1 X 40 PIN
6AG1331-7KB02-2AB0
SIPLUS S7-300 SM331 – 20-POLE -25 … +70 DGR C WITH CONFORMAL COATING BASED ON 6ES7331-7KB02-0AB0 . ANALOG INPUT GALVANICALLY ISOLATED 2 AI, AUFL. 9/12/14 BIT, U/I/THERMOEL./RESISTOR, ALARM, DIAGNOSTICS, 1 X 20-POLE, REMOVE/INSERT W. ACT. BACKPLANE BUS
6AG1331-7KF02-2AB0
SIPLUS S7-300 SM331 20-POLE -25 … +70 DGR C WITH CONFORMAL COATING CONFORMITY WITH EN50155 T1 KAT 1 KL A/B BASED ON 6ES7331-7KF02-0AB0 . ANALOG INPUT GALVANICALLY ISOLATED 8 AI, AUFL. 9/12/14 BIT, U/I/THERMOEL./RESISTOR, ALARM, DIAGNOSTICS, 1 X 20-POLE, REMOVE/INSERT W.ACT. BACKPLANE BUS
6AG1331-7NF00-2AB0
SIPLUS S7-300 SM331 40-POLE -25 … +70 DGR C WITH CONFORMAL COATING CONFORMITY WITH EN50155 T1 CAT 1 KL A/B BASED ON 6ES7331-7NF00-0AB0 . ANALOG INPUT OPTIC. ISOLATED 8 AI; +/-5/10V, 1-5 V, +/-20MA, 0/4 UP TO 20MA, 16 BIT (55 MS), 1 COMMON POINT (50V COM.)
6AG1331-7NF10-2AB0
SIPLUS S7-300 SM331 8AI 40-POLE -25 … +60 DGR C WITH CONFORMAL COATING BASED ON 6ES7331-7NF10-0AB0 . ANALOG INPUT OPTICALLY ISOLATED, 8 AE; +/-5/10V, 1-5 V, +/-20MA, 0/4 TO 20MA, 16 BIT, 1 COMMON POINT(60 V COM.), 4 CHANNEL MODE: 10 MS, 8 CHANNEL MODE: 23-95 MS, 1 X 40 PIN
6AG1331-7PF01-4AB0
SIPLUS S7-300 SM331 8AE WITH CONFORMAL COATING BASED ON 6ES7331-7PF01-0AB0 . ANALOG INPUT OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST STANDARD 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN
6AG1331-7PF11-4AB0
SIPLUS S7-300 SM331 8AI 40-POLE WITH CONFORMAL COATING BASED ON 6ES7331-7PF11-0AB0 . ANALOG INPUT OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN

The analog input modules convert analog signals from the process into digital signals for internal processing in the controller.

The modules feature:

  • Resolution from 9 to 15 bits + sign (with different conversion times), can be parameterized.
  • Different measurement ranges;
    the default setting of the current/voltage ranges is set mechanically using measuring range modules, the fine adjustment is performed with STEP 7 “Hardware configuration” via PG.
  • Interrupt capability;
    the module sends diagnostic and limit-value interrupts to the CPU of the controller.
  • Diagnostics;
    the module sends extensive diagnostic information to the CPU.