SIEMENS SIPLUS S7-300 safety protector Technical specifications

SIPLUS S7-300 safety protector

SIPLUS S7-300 safety protector

  • Permits combined operation of fail-safe signal modules in safety mode and standard S7-300 modules in the same ET 200M system.
  • The safety protector is not required if the safety class SIL 3 or safety category < Cat. 4 is to be achieved.
Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Product No. / Product Description Listprice / Your price
6AG1195-7KF00-2XA0
SIPLUS S7-300 ISOLATION MODULE – 25…+ 60 DGR C WITH CONFORMAL COATING BASED ON 6ES7195-7KF00-0XA0 . SEPARATOR MODULE BETWEEN F- AND STANDARD MODULES WITH REDUNDANT ET200M INTERFACE MODULES USE ONLY WITH SEPARATOR BUS MODULE

Technical specifications

Article number

6AG1195-7KF00-2XA0

SIPLUS S7-300 TRENNBAUGRUPPE

Standards, approvals, certificates

CE mark

Yes

UL approval

Yes; File E239877

FM approval

Yes; CofC 3028431

Ambient conditions

Ambient temperature during operation

  • ● min.

-25 °C; = Tmin

  • ● max.

60 °C; = Tmax

Ambient temperature during storage/transportation

  • ● min.

-40 °C

  • ● max.

70 °C

Altitude during operation relating to sea level

  • ● Ambient air temperature-barometric pressure-altitude

Tmin … Tmax at 1080 hPa … 795 hPa (-1000 m … +2000 m)

Relative humidity

  • ● With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Resistance

Use in stationary industrial systems

  • — to biologically active substances according to EN 60721-3-3

Yes

  • — to chemically active substances according to EN 60721-3-3

Yes

  • — to mechanically active substances according to EN 60721-3-3

Yes

Accessories

belongs to product

ET 200M

Weights

Weight, approx.

10 g