SIEMENS SIPLUS S7-300 SM 332 Product Information

Overview

Analog outputs
For connection of analog actuators

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Application

Analog output modules can be used to output analog signals from the PLC to the process. They are suitable for connecting analog actuators.

Function

The analog output modules convert numerical values from the controller into analog signals (current or voltage) for the process.

The modules feature:

Resolution: 12 to 15 bit
Different voltage and current ranges:
the ranges are set independently for each channel by means of the parameterization software.
Interrupt capability:
in the event of errors, the module sends diagnostic interrupts to the CPU of the controller.
Diagnostics:
the module sends extensive diagnostic information to the CPU.

Product No. / Product Description Listprice / Your price

6AG1332-5HB01-2AB0

SIPLUS S7-300 SM332 – 20-POLE -25 … +70 DGR C WITH CONFORMAL COATING CONFORMITY TO EN50155 T1 CAT 1 CL A/B BASED ON 6ES7332-5HB01-0AB0 . ANALOG OUTPUT OPTICALLY ISOLATED, 2 AO, U/I; 11/12 BITS RESOL., 20 PIN., REMOVE/INSERT WITH ACTIVE BACKPLANE BUS

Show prices

6AG1332-5HD01-7AB0

SIPLUS S7-300 SM332 4AO U/I -25 … +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7332-5HD01-0AB0 . ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 4 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 20 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

Show prices

6AG1332-5HF00-2AB0

SIPLUS S7-300 SM332 40POLE -25…+70 DGR C WITH CONFORMAL COATING BASED ON 6ES7332-5HF00-0AB0 . ANALOG OUTPUT OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

Show prices

6AG1332-7ND02-4AB0

SIPLUS S7-300 SM332 4AO WITH CONFORMAL COATING BASED ON 6ES7332-7ND02-0AB0 . ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION, 4 AO, 16 BIT RESOLUTION, 0-10V, 1-5V, +/-10V, +/-20MA, 0/4 – 20MA, 20 PIN, FIT FOR ISOCHRONE MODE IMPROVED DP-CYCLE TIME FOR ISOCHRONE MODE

Show prices

Technical specifications

Article number	6AG1332-5HD01-7AB0	6AG1332-7ND02-4AB0	6AG1332-5HB01-2AB0	6AG1332-5HF00-2AB0
	SIPLUS S7-300 SM332 4AA U/I	SIPLUS S7-300 SM332 4AA	SIPLUS S7-300 SM332 2AO	SIPLUS S7-300 SM 332 8AO – 40pol
Supply voltage
Load voltage L+
● Rated value (DC)	24 V	24 V	24 V; A power supply according to EN 50155 shall be used for railway applications	24 V
● Reverse polarity protection	Yes	Yes	Yes	Yes
Input current
from load voltage L+ (without load), max.	240 mA	290 mA	135 mA	340 mA
from backplane bus 5 V DC, max.	60 mA	120 mA	60 mA	100 mA
Power loss
Power loss, typ.	3 W	3 W	3 W	6 W
Analog outputs
Number of analog outputs	4	4; Isochronous mode	2	8; 4 @ +70 °C
Voltage output, short-circuit protection	Yes	Yes	Yes	Yes
Voltage output, short-circuit current, max.	25 mA	40 mA	25 mA	25 mA
Current output, no-load voltage, max.	18 V	18 V	18 V	18 V
Output ranges, voltage
● 0 to 10 V	Yes	Yes	Yes	Yes
● 1 V to 5 V	Yes	Yes	Yes	Yes
● -10 V to +10 V	Yes	Yes	Yes	Yes
Output ranges, current
● 0 to 20 mA	Yes	Yes	Yes	Yes
● -20 mA to +20 mA	Yes	Yes	Yes	Yes
● 4 mA to 20 mA	Yes	Yes	Yes	Yes
Load impedance (in rated range of output)
● with voltage outputs, min.	1 kΩ	1 kΩ	1 kΩ	1 kΩ
● with voltage outputs, capacitive load, max.	1 µF	1 µF	1 µF	1 µF
● with current outputs, max.	500 Ω	500 Ω	500 Ω	500 Ω
● with current outputs, inductive load, max.	10 mH	1 mH	10 mH	10 mH
Cable length
● shielded, max.	200 m	200 m	200 m	200 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit	16 bit	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit	12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit
● Conversion time (per channel)	0.8 ms	200 µs; in isochronous mode 640 µs	0.8 ms	0.8 ms
Settling time
● for resistive load	0.2 ms	0.2 ms	0.2 ms	0.2 ms
● for capacitive load	3.3 ms	3.3 ms	3.3 ms	3.3 ms
● for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)	0.5 ms	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational error limit in overall temperature range
● Voltage, relative to output range, (+/-)	0.5 %; ±0.6 % @ < 0 °C or > 60 °C	0.12 %	0.5 %; ±0.6 % @ < 0 °C or > 60 °C	0.5 %; ±0.6 % @ < 0 °C or > 60 °C
● Current, relative to output range, (+/-)	0.6 %; ±0.7 % @ < 0 °C or > 60 °C	0.18 %	0.6 %; /-0.7% @ < 0 °C or > 60 °C	0.6 %; ±0.7 % @ < 0 °C or > 60 °C
Basic error limit (operational limit at 25 °C)
● Voltage, relative to output range, (+/-)	0.4 %	0.02 %	0.4 %	0.4 %
● Current, relative to output range, (+/-)	0.5 %	0.02 %	0.5 %	0.5 %
Interrupts/diagnostics/status information
Diagnostic functions	Yes; Parameterizable		Yes; Parameterizable	Yes; Parameterizable
Substitute values connectable	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable	Yes; Parameterizable
Alarms
● Diagnostic alarm	Yes; Parameterizable	Yes	Yes; Parameterizable	Yes; Parameterizable
Diagnostic messages
● Diagnostic information readable	Yes		Yes	Yes
Diagnostics indication LED
● Group error SF (red)	Yes	Yes	Yes	Yes
Potential separation
Potential separation analog outputs
● between the channels and backplane bus	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	500 V DC	1500 V DC	500 V DC	500 V DC
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877	Yes; File E239877	Yes; File E239877
FM approval	Yes; CofC 3028431	Yes	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)	Yes	Yes	Yes	Yes
KC approval	Yes	Yes	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes	Yes	Yes
Railway application
● EN 50121-4	No		No	No
● EN 50155	No		Yes; T1 Category 1 Class A/B horizontal mounting position	No
Ambient conditions
Ambient temperature during operation
● min.	-25 °C; = Tmin	0 °C; = Tmin	-25 °C; = Tmin	-25 °C
● max.	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use	60 °C; = Tmax	70 °C; = Tmax; for use on railway vehicles according to EN50155, the rated temperature range -25 … +55 °C (T1) or 60 °C @ UL/ULhaz/ATEX/FM use applies	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C	70 °C
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude	Tmin … Tmax at 1080 hPa … 795 hPa (-1000 m … +2000 m) // Tmin … (Tmax – 10K) at 795 hPa … 658 hPa (+2000 m … +3500 m) // Tmin … (Tmax – 20K) at 658 hPa … 540 hPa (+3500 m … +5000 m)	Tmin … Tmax at 1080 hPa … 795 hPa (-1000 m … +2000 m) // Tmin … (Tmax – 10K) at 795 hPa … 658 hPa (+2000 m … +3500 m) // Tmin … (Tmax – 20K) at 658 hPa … 540 hPa (+3500 m … +5000 m)	Tmin … Tmax at 1080 hPa … 795 hPa (-1000 m … +2000 m) // Tmin … (Tmax – 10K) at 795 hPa … 658 hPa (+2000 m … +3500 m) // Tmin … (Tmax – 20K) at 658 hPa … 540 hPa (+3500 m … +5000 m)	Tmin … Tmax at 1080 hPa … 795 hPa (-1000 m … +2000 m) // Tmin … (Tmax – 10K) at 795 hPa … 658 hPa (+2000 m … +3500 m) // Tmin … (Tmax – 20K) at 658 hPa … 540 hPa (+3500 m … +5000 m)
Relative humidity
● With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	20-pin	20-pin	20-pin	40-pin
Dimensions
Width	40 mm	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm	120 mm
Weights
Weight, approx.	220 g	220 g	220 g	272 g