SIEMENS S7-1500 SIPLUS Standard CPUs – SIPLUS CPU 1511-1 PN

SIPLUS CPU 1511-1 PN

  • Entry-level CPU in the S7-1500 controller product range
  • Suitable for applications with medium requirements for program scope and processing speed
  • Used as central controller in production lines with central and distributed I/O
  • PROFINET IO IRT interface with 2-port switch
  • PROFINET IO Controller for operating distributed I/O on PROFINET
  • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
  • Isochronous mode
  • SIMATIC memory card required for operation of the CPU

Please note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

SEIMENS SIPLUS CPU 1511-1 PN Ordering data

Product No. / Product DescriptionListprice / Your price
6AG1511-1AK01-2AB0
SIPLUS S7-1500 CPU 1511-1 PN -40 … +60 °C STARTUP -20 °C WITH CONFORMAL COATING BASED ON 6ES7511-1AK01-0AB0 . CENTRAL PROCESSING UNIT WITH WORKING MEMORY 150 KB FOR PROGRAM AND 1 MB FOR DATA, 1. INTERFACE: PROFINET IRT WITH 2 PORT SWITCH, 60 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6AG1511-1AK01-7AB0
SIPLUS S7-1500 CPU 1511-1 PN -40 … +70 DEGREES C STARTUP -25 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7511-1AK01-0AB0 !!NO ASSEMBLY IS PLUGGABLE ON THE LEFT SIDE OFF THE CPU!! . PROCESSING UNIT WITH WORKING MEMORY 150 KB FOR PROGRAM AND 1 MB FOR DATA, 1. INTERFACE: PROFINET IRT WITH 2 PORT SWITCH, 60 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY

The CPU 1511-1 PN features:

  • A powerful processor:
    The CPU achieves command execution times as low as 60 ns per binary instruction.
  • A large work memory:
    150 KB for program, 1 MB for data
  • SIMATIC Memory Cards as load memory;
    permit additional functions such as datalog and archives
  • Flexible expansion capability:
    single-tier configuration with max. 32 modules (CPU + 31 modules)
  • Display with functions for:
    • Display of overview information such as IP address of the integrated interface, station name, higher level designation, location designation, etc.,
    • Display and acknowledgment of diagnostic and user messages
    • Display of module information
    • Display of a user-definable logo
    • Showing display settings
    • Setting of IP addresses
    • Setting of date and time
    • Selection of the operating mode
    • Resetting of the CPU to factory settings
    • Backup and restoring of the project
    • Disabling/enabling of the display
    • Enabling of protection levels
  • PROFINET IO IRT interface for connecting distributed I/O via PROFINET