Warning: Illegal string offset 'gap' in /www/wwwroot/www.aotewell.com/wp-content/themes/enfold/config-templatebuilder/avia-shortcodes/masonry_entries/masonry_entries.php on line 499

SIMATIC ET 200SP – powerful IO system for compact control cabinets

The innovative I/O system SIMATIC ET 200SP convinces through maximum usability, particularly compact design, and impressive performance.SIMATIC ET 200SP is the result of a global exchange with users from all industries. We have thought of everything and optimized a lot of features in terms of their practical suitability. As a result, we made it easy to use in terms of installation, configuration, and diagnosis.

SIMATIC ET 200SP
SIMATIC ET 200SP System

SIMATIC ET 200SP System

Discover how the most versatile SIMATIC ET 200SP distributed I/O system sets benchmarks in usability, compactness and performance.

SIMATIC ET 200SP CPUs

SIMATIC ET 200SP CPUs

For SIMATIC ET 200SP, interface modules with integrated CPU and PROFINET connection are available. The functionality of the CPUs corresponds to that of the SIMATIC S7-1500.

SIMATIC ET 200SP Interface modules

SIMATIC ET 200SP Interface modules

The interface modules connect the I/O system to PROFINET or PROFIBUS and exchange data between the higher-level controller and the I/O modules.

SIMATIC ET 200SP Bus Adapters

SIMATIC ET 200SP Bus Adapters

Some interface modules of the SIMATIC ET 200SP have a universal PROFINET interface for BusAdapters. With the appropriate BusAdapter, the type of connection can be adapted to the requirements of the respective application.

SIMATIC ET 200SP Communication Modules

SIMATIC ET 200SP Communication Modules

Communication modules increase the communication capabilities of the SIMATIC ET 200SP through additional communication functions or more interfaces.

SIMATIC ET 200SP Signal Modules

SIMATIC ET 200SP Signal Modules

Scalable and cost-optimized configuration of a ET 200SP station is achieved by a comprehensive portfolio of Signal Modules: Choose among 30 digital or analog In- and Output modules.

SIMATIC ET 200SP Failsafe I/O Modules

SIMATIC ET 200SP Failsafe I/O Modules

With the SIMATIC ET 200SP, safety-related communication is also possible via PROFIsafe. The safety modules for digital inputs and outputs (DI and DQ) correspond to the standard modules with respect to their size.

SIMATIC ET 200SP Technology Module

SIMATIC ET 200SP Technology Module

Technology modules offer hardware-level signal pre-processing for rapid counting, measurement and position registration for a variety of transducers.

SIMATIC ET 200SP Motor starters

SIMATIC ET 200SP Motor starters

The ET 200SP motor starter completes the system. Controlling, switching, starting or monitoring – the ET 200SP motor starter offers complete reliability.

SIMATIC ET 200SP

Overview:

SIMATIC ET 200SP

The scalable SIMATIC ET 200SP I/O system is a highly flexible, modular I/O system with IP20 degree of protection. Via an interface module with PROFINET or PROFIBUS interface it can exchange IO data of the connected I/O modules with a higher-level control system. Alternatively, as further head-end stations, various PLC, F-PLC and Open Controllers are available as compact S7-1500 Controllers (Distributed Controller). ET 200SP components are available as SIPLUS version for extreme requirements and a high degree of robustness.

Compact design

  • Modular configuration with up to 64 modules
  • System-integrated self-assembling load group supply without power module via light BaseUnits
  • Small size and highly flexible due to the modular design and comprehensive product range
  • Up to 16 channels per module
  • Permanent wiring
  • Hot swapping: Module replacement without tools in RUN
  • Operation with gaps

Flexible connection system

  • Push-in terminals for cross-sections up to 1.5 mm2 with wire end ferrule, and up 2.5 mm2 without wire end ferrule
  • BaseUnits for 1-wire or direct multi-wire connection
  • Optimum accessibility for wiring due to spring release and measuring tap next to the conductor opening
  • Flexible PROFINET connection via BusAdapter (RJ45, FastConnect, plastic or glass fiber-optic cables), also as integrated media converter

Benefits

Simple application

  • Free selection of the PROFINET connection system and characteristics via bus adapter
  • No tools needed for one-handed wiring using push-in terminals
  • Improved accessibility of the wiring due to new arrangement of the spring NC contacts alongside the associated conductor aperture
  • Maximum clarity due to the use of color and reference code plates, as well as labeling strips
  • Diagnostics functions
  • Wiring test, diagnostics, naming etc. using the free PRONETA software tool

Compact design

  • The station can be expanded up to 64 modules (depending on the interface module)
  • Minimal space required in the control cabinet
  • Compact dimensions, suitable for 80 mm standard control cabinets

Strong performance

  • High-sped communication over PROFINET
  • Module and terminal box can be replaced during operation ( “hot swapping”)
  • Consistent shielding of conductor via terminal box and backplane bus to the PROFINET cable
  • Greater energy efficiency due to system-integrated PROFIenergy
  • Configuration control via software

Application

SIMATIC ET 200SP is a multifunctional distributed I/O system for a wide range of applications. Thanks to its scalable design, you can gear the I/O station exactly to the on-site requirements. SIMATIC ET 200SP is constructed with IP 20 protection and designed for installation in a control cabinet.

Function

Mode of operation

Via PROFINET or PROFIBUS, a central controller can access the distributed I/O modules of the ET 200SP in the same way as central I/O modules.

Communication is handled entirely by the PN controller or the master interface module (in the central controller) and in the IM 155-6. Interference-free internal data transfer using shielded cables.

Comprehensive, channel-specific and easy-to-program diagnostics with plain text messages permit the localization and correction of plant errors in the shortest possible time and significantly increase availability.

Configuration, parameterization and diagnostics

The ET 200SP is configured and assigned parameters via STEP 7 or the configuration tool of the controller used.

Extensive diagnostic information is available to the user, depending on the selected I/O module.

Safety Integrated

  • Easy integration of fail-safe modules
  • Easy F parameter assignment via software
  • Group-by-group disconnection of non-fail-safe modules

Design

Expansion limits

Depending on the selected header module (interface module, S7-1500, SP-CPU, or open controller) and parameter assignment, there are different limit values which restrict the maximum configuration of an ET 200SP station.

  • Up to 1 m station width (without header module)
  • PROFINET:
    • up to 64 I/O modules
    • up to 1440 bytes
  • PROFIBUS:
    • up to 32 I/O modules
    • up to 244 bytes of user data including quality information
    • up to 244 bytes of parameters (this limit value only applies for configuring via a GSD file)

Mixed configuration with ET 200AL

It is possible to integrate up to 16 I/O modules of the ET 200AL (IP65/IP67) I/O system in an installation of the scalable I/O system ET 200SP (IP20) via a “BU-Send” BaseUnit and a “BA-Send” BusAdapter.

Communication standards

  • PROFINET IO
  • PROFIBUS DP V0/V1
  • ET connection for connecting the ET 200AL (IP67)
  • IO-Link V1.1
  • AS-Interface
  • Point-to-point (RS 232, RS 485, RS 422)

CPU

  • PROFINET connection with 3 ports
  • IO controller and PN IO device
  • Optional expansion as DP master/slave
  • Also as fail-safe version and Open Controller

Popular Products Series

6SE6420-2AD27-5CA1 MICROMASTER 420 7.5KW Wich Filter

6SE6420-2AD27-5CA1 MICROMASTER 420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 7.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 7.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP
12/07/2019/by admin

Siemens 6SL3120-1TE15-0AA0 SINAMICS SINGLE MOTOR MODULE

6SL3120-1TE15-0AA0 SINAMICS SINGLE MOTOR MODULE INPUT: 600 V DC OUTPUT: 3-PH. 400 V, 5 A INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE
12/07/2019/by eve

ABB BAILEY IMFBS01 INFI 90 FIELD BUS SLAVE IMFBSO1

ABB BAILEY IMFBS01 INFI 90 FIELD BUS SLAVE IMFBSO1
12/07/2019/by Tia

ABB Bailey IMCIS02 Control I/o Slave INFI90

ABB IMCIS02 Bailey Control I/o Slave INFI 90

ABB Bailey IMCIS02…
12/07/2019/by Tia

6SE7014-0TP50 Siemens SIMOVERT main drive motion control compact,510 V – 650 V

SIMOVERT MASTERDRIVES MOTION CONTROL COMPACT PLUS INVERTER 510 V - 650 V DC, 4 A POWER RATING: 1.5 KW DOCUMENTATION ON CD
12/07/2019/by eve

ABB IMHSS03 BAILEY HYDRAULIC SERVO MODULE SYMPHONY

ABB IMHSS03 BAILEY HYDRAULIC SERVO MODULE SYMPHONY
12/07/2019/by Tia

ABB Bailey IMASI02 Infi 90 Analog Slave Input, I/O Module

ABB Bailey IMASI02 Infi 90 Analog Slave Input, I/O Module
12/07/2019/by Tia

6AV3627-1QL01- 0AX0 SIEMENS TOUCH PANEL TP27-10 10.4″ STN COLOR LC DISPLAY 1 MB

TOUCH PANEL TP27-10 10.4" STN COLOR LC DISPLAY 1 MB FLASH-EPROM
12/07/2019/by eve

6SE7038-2EH85-1AA0 Master Drives Rectifier Regenerative Unit 460V 400KW 821A

6SE7038-2EH85-1AA0 Master Drives Rectifier Regenerative Unit ***Spare part*** SIMOVERT Master drives Rectifier Regenerative Unit /IP00 460 V 3 AC, 50/60 Hz 821Av400KW
12/06/2019/by admin

6FC5372-0AA30-0AA1 SINUMERIK 840D SL NCU720.3PN WITH PLC 317-3PN/DP

6FC5372-0AA30-0AA1 SINUMERIK 840D SL NCU720.3PN WITH PLC 317-3PN/DP USER MEMORY: CNC: 3MB; PLC: 512KB INTERNAL-HEAT-DISSIPATION
12/06/2019/by admin

GE Fanuc IC670GBI002 Genius Bus INTF Unit

GE Fanuc IC670GBI002 Genius Bus INTF Unit
12/06/2019/by admin

A26TVIS-4 Differntial Pressure Manifold

A26TVIS-4 Anderson Greenwood Differntial Pressure Manifold, Anderson Greenwood - M4A Series
12/06/2019/by admin

6FC5370-0AA00-2AA1 Siemens 802D SL CNC system

SINUMERIK 802D SL VERSION T/M PLUS OPERATOR PANEL CNC COMPLETE WITH NC ,PLC , HMI PART AND DRIVE CONTROL FOR SINAMICS AXES/SPINDLES (4/1 OR 3/2) INCL:. LOG BOOK AND TOOL BOX
12/03/2019/by eve

SIEMENS 6FC5247-0AA00-0AA3 SINUMERIK 840D/DE BOX FOR ELECTRONIC CONTROL DEVICE NCU

SINUMERIK 840D/DE BOX FOR ELECTRONIC CONTROL DEVICE NCU BOX FOR INSTALLATION OF NCU 561.2/.3/.4/.5 NCU 571/571.2/.3/.4/.5 NCU 572/572.2/.3/.4/.5 NCU 573.2/.3/.4/.5 WITH POWER UNIT, BATTERY AND FAN
12/03/2019/by eve

SIEMENS 6ES7315-2EH14-0AB0 SIMATIC S7-300 CPU,384 KB

SIMATIC S7-300 CPU 315-2 PN/DP, Central processing unit with 384 KB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
12/02/2019/by eve

SIEMENS 6ES7431-0HH00-0AB0 S7-400, analog input SM 431, non isolated 16 AI

SIMATIC S7-400, analog input SM 431, non-isolated 16 AI, resolution 13 bit, +/-10 V, +/-20 mA, 4 - 20 mA 20 ms conversion time
12/02/2019/by eve

6SL3120-1TE21-8AA4 S120 MOTOR MODULE DC600V OUTPUT: 3AC 400V, 18A

6SL3120-1TE21-8AA4 SINAMICS S120 SINGLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3AC 400V, 18A FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE
12/01/2019/by admin

6SE6440-2AD27-5CA1 MICROMASTER 440 W/ FILTER 3AC 380-480V 11KW

MICROMASTER 440 WITH BUILT-IN CLASS A FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 7.5 KW OVERLOAD 150% 60 S, 200% 3 S SQUARED TORQUE POWER 11 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +50 DEG. C WITHOUT AOP/BOP
12/01/2019/by admin

ABB IMMFP02,Multi-Function Processor Module

ABB IMMFP02,Multi-Function Processor Module
12/01/2019/by admin

6ES7314-5AE03-0AB0 CPU314IFM Siemens 6ES7 314-5AE03-0AB0

SIMATIC S7-300, CPU 314 IFM COMPACT CPU WITH MPI, 16DI/16DO, 4AI/1AO, 2 X 40 PIN, INTEGRATED 24V DC POWER SUPPLY, 32 KBYTE WORKING MEMORY
12/01/2019/by admin

SIEMENS SINAMICS CONVERTER POWER MODULE 6SL3310-1TE33-1AA0

SIEMENS SINAMICS CONVERTER POWER MODULE 6SL3310-1TE33-1AA0 INVERTER SINAMICS S120 CONVERTER POWER MODULE 3AC 380-480V, 50/60HZ, 310A (160 KW) FRAME SIZE: CHASSIS INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE AND MOUNTING PLATE FOR CU310
12/01/2019/by admin

6SL3310-1GH38-1AA0 Power Module IP00 660-690V 3AC, 50/60 Hz, 810 A

6SL3310-1GH38-1AA0 SINAMICS G130 Power Module IP00 660-690V 3AC, 50/60 Hz, 810 A Type rating: 800kW (VT) 6-pulse supply without power recovery incl. Drive-CLiQ cable without control module
12/01/2019/by admin

6SL3352-1AG37-4DA1 SINAMICS POWER BLOCK 3 AC 500-690V, 50/60HZ, 735A AC DRIVE

6SL33521AG374DA1 | 6SL33521AG374DA1
SINAMICS REPLACEMENT POWER BLOCK FOR 3 AC 500-690V, 50/60HZ, 735A AC DRIVE/POWER MODULE U OR V OR W PHASE VARNISHED ASSEMBLIES AND NICKEL-PLATED CONDUCTOR BAR
12/01/2019/by admin

6SL3310-1PE33-7AA0 SINAMICS G120P POWER MODULE PM330

SIEMENS 6SL3310-1PE33-7AA0 SINAMICS G120P POWER MODULE PM330 WITHOUT FILTER WITHOUT BULT IN BRAKING CHOPPER 3AC 380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 160KW FOR 150% 60S,100% 240S OUTPUT LIGHT OVERLOAD: 200KW FOR 110% 60S, 100% 240S AMBIENT TEMP 0 TO +40 DEG C 1447 X 452 X 328 (HXWXD), FSGX PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED with CU230P-2 FOR FIRMWARE-VERSION V4.6
12/01/2019/by admin