SIMATIC PCS 7/APACS+ OPERATOR SYSTEM

The SIMATIC PCS 7/APACS+ OS software offered for migration of APACS+ operator systems is tailored to the architecture of the SIMATIC PCS 7 operator system. It supports both single-user systems as well as multi-user systems in client-server architecture.

Image result for SIMATIC PCS 7/APACS+ OPERATOR SYSTEM

Data from different systems can be displayed in one process picture on the OS clients of a multiuser system, both from APACS/QUADLOG controllers on the M bus and from the SIMATIC PCS 7 automation systems on the Industrial Ethernet. The multi-client architecture of the operator systems enables a client to retrieve data from different servers.

With smaller client-server systems it is possible to use a SIMATIC PCS 7/APACS+ OS server with dual-channel functionality. This implements the communication with the APACS/QUADLOG controllers and the SIMATIC PCS 7 automation systems via two separate communication channels.

Notes:

The SIMATIC PCS 7/APACS+ OS V9.0 runtime software is based on the SIMATIC PCS 7 V9.0 operator system.

You can find information on the product range and the ordering data for SIMATIC PCS 7 V9.0 in the ST PCS 7 catalog.

Contact us !We have a good prices and a good service!

The following software components are required depending on the configuration of the SIMATIC PCS 7/APACS+ operator system as a single station or client/server combination (single or redundant server):

REQUIRED SOFTWARE

SIMATIC PCS 7 ARCHITECTURE

OS single station

Client/server
(non-redundant server)

Client/server
(redundant server)

SIMATIC PCS 7/APACS+ OS Single Station Pack V9.0 (2 000 PO)

SIMATIC PCS 7/APACS+ OS Server Pack V9.0 (2 000 PO)

SIMATIC PCS 7/APACS+ OS Redundant Server Pack V9.0 (2 000 PO)

SIMATIC PCS 7 OS Software Client V9.0

(See section “OS Software” in ST PCS 7 catalog)

The number of process objects (PO) supplied with the software components in the table is expandable with SIMATIC PCS 7 OS Runtime licenses from the “OS Software” section of the ST PCS 7 catalog. In this section of the catalog, you can also select additional software for SIMATIC PCS 7/APACS+ operator systems.

Appropriate basic hardware for a PCS 7/APACS+ operator station as a single station, server or client version can be found in the section “Industrial Workstation/IPC” of the ST PCS 7 catalog.

Communication between the APACS+/QUADLOG controllers on the M-Bus and the SIMATIC PCS 7/APACS+ OS on the Industrial Ethernet plant bus usually takes place via the Industrial Ethernet module IEM (see last paragraph of this section). In the case of small configurations with limited expansion, a SIMATIC PCS 7/APACS+ OS station can also be directly linked to an APACS+ MBUS segment by means of an APACS+/QUADLOG MBI PCI card.