SIMENS SITRANS TO500, multi-point temperature transmitter

SITRANS TO500The SITRANS TO500 multipoint measuring system is used for evaluating a large number of temperature measuring sensors arranged on a very narrow fiber-optic temperature measuring lance. The system consists of the following components: a read-out unit, the transmitter, and the measuring lance, which can each be connected to up to 48 temperature sensors on the transmitter at four channels. With up to four measuring probes, 192 measuring points can therefore be processed at the same time by a SITRANS TO500. The extremely thin sensor measuring probe of < 2 mm is used for measured value transmission. The system is therefore particularly suitable when the user wishes to install a very large number of measuring points in a tight space and with low thermal mass, such as in tube and tube bundle reactors or in capillary or microreactors.

The fast and gap-free detection of temperature profiles enables the plant operator to optimize processes in terms of lifetime, quality and output. Local overheating is quickly and accurately detected, thereby preventing damage to the process, plant and environment.

SITRANS TO500 technology is based on so-called fiber Bragg gratings (FBGs) which are arranged at individually defined points on the sensor probe. The transmitter sends light waves to the fiber-optic sensors and evaluates the reflected portions. In the transmitter, light is generated in the wavelength of 1500 to 1600 nm and output to the sensor measuring probe by means of a continuously tunable laser light. Each fiber Bragg grating reflects light of a defined wavelength. The wavelength reflected by the grating varies depending on the temperature. The reflection at the FBGs is thus a measure of the temperature at the respective measuring point. A gas cell with fixed absorption line serves as a reference in the SITRANS TO500 and the wavelength determination is continuously adjusted by it.

The transmitter provides the determined values for analysis in control systems via a Profibus DP interface and makes them available for management of the assets and optimization of the process. The parameters of the SITRANS TO500 are set via the integrated Ethernet interface.

Product No. / Product DescriptionListprice / Your price
Transmitter for multipoint temperature measurement

SITRANS TO500 Benefits

  • < 2 mm diameter of the measuring lance for more reactor space due to the smaller protective tube and thus faster response times
  • Gap-free temperature profile due to a total of 192 measuring points for process optimization
  • Simple insertion of the measuring probe into the protective tube due to the rolled state, as well as low-cost transport and easy installation
  • Flexible, application-specific customer solution through individual positioning of the FBGs on the sensor measuring probe
  • Measured value transfer takes place in the same fiber; no additional cables are necessary
  • Especially suitable for applications in which a large number of measuring points are to be installed in a very tight space and with low thermal mass

  • Evaluation of a large number of sensors (fiber Bragg grating (FBG)) in one temperature transmitter
  • Low space requirement of the measurement lances
  • 4 measuring lance channels per transmitter
  • Easy to install
  • PROFIBUS DP – Simple integration into control system
  • Fast response to temperature changes
  • Exact, no recalibration required due to internal reference
  • Also suitable for high process temperatures


SITRANS TO500 is used for evaluating a high number of sensors that are arranged on a fiber-optic multipoint temperature measuring lance.

Up to four measuring lances, each with as many as 48 sensors (Fiber Bragg Grating (FBG)) can be simultaneously processed by one SITRANS TO500.

Accurate and fast determination of temperature profiles enables process optimization in terms of service life, quality and output.

Locations of excessive temperature rise are quickly and accurately detected, thereby preventing damage to the process, equipment and environment.

Wherever temperature profiles must be determined and installation space is limited, the SITRANS TO500 with fiber-optic temperature measurement is the right choice.

SITRANS TO500 Detail

InputFBG (fiber Bragg grating) temperature measuring probes4 channels
Measured variableTemperature
Input typeFBG sensors (max. 48 per channel)
Characteristic curvesTemperature-linear
Resolution0.1 K
Measuring accuracy< 0.5 K
Repeatability< 0.5 K
Measuring cycle< 1 s
Measuring range-180°C to +400°C, depending on measuring probe type
OutputOutput signalPROFIBUS DP
Power supply24 V DC ± 20%
ProtectionAgainst reverse polarity
Measuring speed
Measuring rate1 Hz, independent of the number of FBGs
Optical Power≤ 1 mW per channel
Laser protection classClass 1
Operating conditionsAmbient temperature0 to +50°C
Storage temperature-40 to +85°C
Relative humidity< 80%, non condensing at 50°C
Electromagnetic compatibilityAccording to EN 61326
ConstructionWeight2.4 kg
Dimensions250 x 140 x 110 mm
DIN rail adapterAt the back
Displays and buttonsLEDs“Power-on” (continuous light)
“Status” (flashing during startup; otherwise continuous light)
Pushbutton“Reset” (system restart or address reset)

Popular Products Series