SIEMENS SINUMERIK I/O SINUMERIK Analog Drive Interface for 4 axes ADI 4

Overview

The SINUMERIK Analog Drive Interface for 4 axes ADI 4 can be used to operate up to 4 drives with analog setpoint interface.


Benefits

  • Connection via PROFIBUS DP
  • Motion Control functionality (isochronous mode)

Design

  • 4 inputs for incremental encoders (TTL signals) or optionally 4 inputs for absolute encoders (SSI interface)
  • 4 analog outputs ± 10 V for the setpoint
  • 4 relay contacts for drive enable of axes 1 to 4
  • 8 digital outputs (4 drive-specific)
  • 10 digital drive-specific inputs
  • Onboard status display on 4 diagnostics LEDs

To supply the module and digital outputs with power, an external voltage source (+24 V DC) is needed.

Product No. / Product Description Listprice / Your price
6FC5211-0BA01-0AA4
SINUMERIK PERIPHERIE ANALOG DRIVE INTERFACE (ADI4) FOR 4 AXES OVER PROFIBUS DP WITH MOTION CONTROL FUNCTIONALITY FIRMWARE 01.04.08

Configuration

Connection overview for ADI 4


Technical specifications

Article number

6FC5211-0BA01-0AA4

Product brand name

SINUMERIK

Product short term

ADI 4

Product designation

Analog Drive Interface for 4 Axes

Supply voltage at DC

24 V

Active power consumption maximum

30.2 W

Degree of protection

IP20

Environmental category acc. to IEC 60721-3-3

Condensation and icing excluded. Low air temperature 0 °C (32 °F).

Relative humidity at 25 °C (77 °F), during

  • ● storage

5 … 95 %

  • ● transport

5 … 95 %

  • ● operation

5 … 95 %

Ambient temperature, during

  • ● storage

-20 … +55 °C (-4 … +131 °F)

  • ● transport

-40 … +70 °C (-40 … +158 °F)

  • ● operation

0 … 55 °C (32 … 131 °F)

Width

48.5 mm (1.90945 in)

Height

325 mm (12.79528 in)

Depth

154.4 mm (6.07874 in)

Net weight

1.5 kg (3.30693 lb)

Certificate of suitability

CE / UL / CSA