Yaskawa AC Drive G7 Adjustable Speed Drives

Yaskawa AC Drive G7

The AC Drive G7: This amazing AC drive is the ultimate performance solution with increased speed and torque response to provide servo-like performance from an induction motor. In addition, the G7 drive has the world’s first 480V 3-level inverter architecture that eliminates or minimizes the installation problems associated with IGBT switching and
protects the entire motor-drive system.

AC Drive G7 performance makes it the ideal drive for high performance speed, torque, or position control applications. Several control modes are provided. In open loop vector mode, the latest flux observer algorithms extend speed range and provide maximum starting torque.
In closed loop vector mode, 0.01% speed regulation and 1000:1 control range can be achieved. Zero-servo capability provides position control at zero speed.

The G7 drive has the world’s first 480V 3-level inverter architecture for total system protection. This patented design can eliminate peripheral components typically required to solve installation problems. The G7 allows motor operation at very long cable lengths, meeting NEMA MG1 Part 31, with peak voltage being 30% less than conventional drives. With motor bearing current being typically 50% less than standard drives, the G7 provides four times the motor bearing life. Audible motor noise on the 480V G7 drive is 5-10dB (20%) less than the prior generation drive, even when operating at half the carrier frequency. Common mode current is half that of competitor drives.

Performance Features

Performance Features

  • Ratings: 0.5 to 150 HP, 240 VAC
    0.5 to 500 HP, 480 VAC
  • Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
  • Starting torque: 150% at frequency;
    1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
  • Output frequency: 0.01 to 400 Hz
  • Output frequency resolution: 0.001 Hz
  • Speed control range:
    40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
Protective Features

Protective Features

  • Torque limit (four quadrant)
  • Electronic motor overload (UL 508C)
  • Over-torque / under-torque detection
  • Phase-to-phase and ground fault short circuit protection
  • Over-current, over-voltage, and overtemperature protection
  • Input / output phase loss protection
  • Optically-isolated controls
  • DC bus charge indicator
  • Motor thermistor input
Design Features

Design Features

  • LCD keypad display: 5 lines x 16 characters, backlit, 7 languages, copy function
  • Simple programming: Quick start and modified parameter groups
  • Microprocessor logic: 32-bit
  • Memory type: Flash memory for easy updates, custom software applications, and non-volatile program retention
  • Control logic: 24 VDC (sinking or sourcing)
  • Terminal strip: Quick disconnect
  • Front cover: Split for easy wiring
  • Heat sink fan: Plug-in with on-off control
  • Motor auto-tuning: Static and rotational
  • Speed search: Bi-directional into rotating motor
Options

Options
• DriveWorksEZ™ programming tool
• DriveWizard™ management software
• Custom drive software
• EtherNet/IP, Modbus TCP/IP, Profibus-DP,
DeviceNet, and others
• Remote display / keypad
• High resolution I/O cards
• 120VAC interface
• NEMA 12 enclosures
• Input breaker, disconnect, fuses
• Input reactors
• EMC-compliant filters
• Dynamic braking transistor (if not standard)
• DC bus choke (if not standard)
• Line regeneration (RC5 or DC5)

Design

Related image

Yaskawa AC Drive G7 Adjustable Speed Drives

Models & Ratings

208V | 240V | 230V | 480V

208V

Catalog Model Number
Drive Model Number
Rated Output Current (Amps)
Nominal HP2
Standard Enclosure
CIMR-G7U20P41
CIMR-G7U20P41A
CIMR-G7U20P41B
3.2
1/2
NEMA 1
CIMR-G7U20P71
CIMR-G7U20P71A
CIMR-G7U20P71B
6
1
CIMR-G7U21P51
CIMR-G7U21P51A
CIMR-G7U21P51B
8
2
CIMR-G7U22P21
CIMR-G7U22P21A
CIMR-G7U22P21B
12
3
NEMA 1
CIMR-G7U23P71
CIMR-G7U23P71A
CIMR-G7U23P71B
18
5
CIMR-G7U25P51
CIMR-G7U25P51A
CIMR-G7U25P51B
27
7.5
NEMA 1
CIMR-G7U27P51
CIMR-G7U27P51A
CIMR-G7U27P51B
34
10
CIMR-G7U20111
CIMR-G7U20111A
CIMR-G7U20111B
49
15
NEMA 1
CIMR-G7U20151
CIMR-G7U20151A
CIMR-G7U20151B
66
20
CIMR-G7U20181
CIMR-G7U20181A
CIMR-G7U20181B
80
25
NEMA 1
CIMR-G7U20221
CIMR-G7U20221A
CIMR-G7U20221B
96
30
CIMR-G7U20300
CIMR-G7U20300A
CIMR-G7U20300B
130
40
Protected Chassis
CIMR-G7U20370
CIMR-G7U20370A
CIMR-G7U20370B
160
50
CIMR-G7U20450
CIMR-G7U20450A
CIMR-G7U20450B
183
60
Protected Chassis
CIMR-G7U20550
CIMR-G7U20550A
CIMR-G7U20550B
224
75
CIMR-G7U20750
CIMR-G7U20750A
CIMR-G7U20750B
300
100
Protected Chassis
CIMR-G7U20900
CIMR-G7U20900A
CIMR-G7U20900B
358
125
CIMR-G7U21100
CIMR-G7U21100A
CIMR-G7U21100B
415
150
  1. For single-phase input, contact Yaskawa
  2. Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors
  3. Check motor FLA for proper drive sizing

240V

Catalog Model Number
Drive Model Number
Rated Output Current (Amps)
Nominal HP2
Standard Enclosure
CIMR-G7U20P41
CIMR-G7U20P41A
CIMR-G7U20P41B
3.2
3/4
NEMA 1
CIMR-G7U20P71
CIMR-G7U30P71A
CIMR-G7U30P71B
6
1
CIMR-G7U21P51
CIMR-G7U21P51A
CIMR-G7U21P51B
8
2
NEMA 1
CIMR-G7U22P21
CIMR-G7U22P21A
CIMR-G7U22P21B
12
3
CIMR-G7U23P71
CIMR-G7U23P71A
CIMR-G7U23P71B
18
5
NEMA 1
CIMR-G7U25P51
CIMR-G7U25P51A
CIMR-G7U25P51B
27
7.5
CIMR-G7U27P51
CIMR-G7U27P51A
CIMR-G7U27P51B
34
10
NEMA 1
CIMR-G7U20111
CIMR-G7U20111A
CIMR-G7U20111B
49
15
CIMR-G7U20151
CIMR-G7U20151A
CIMR-G7U20151B
66
20
NEMA 1
CIMR-G7U20181
CIMR-G7U20181A
CIMR-G7U20181C
80
25
NEMA 1
30
CIMR-G7U20221
CIMR-G7U20221A
CIMR-G7U20221B
96
303
NEMA 1
CIMR-G7U20300
CIMR-G7U20300A
CIMR-G7U20300B
130
40
Protected Chassis
50
  1. For single-phase input, contact Yaskawa
  2. Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors
  3. Check motor FLA for proper drive sizing

230V

Catalog Model Number
Drive Model Number
Rated Output Current (Amps)
Nominal HP2
Standard Enclosure
CIMR-G7U20370
CIMR-G7U20370A
CIMR-G7U20370B
160
60
Protected Chassis
CIMR-G7U20450
CIMR-G7U20450A
CIMR-G7U20450B
183
603
CIMR-G7U20550
CIMR-G7U20550A
CIMR-G7U20550B
224
75
Protected Chassis
CIMR-G7U20750
CIMR-G7U20750A
CIMR-G7U20750B
300
100
CIMR-G7U20900
CIMR-G7U20900A
CIMR-G7U20900B
358
125
Protected Chassis
CIMR-G7U21100
CIMR-G7U21100A
CIMR-G7U21100B
415
150
  1. For single-phase input, contact Yaskawa
  2. Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors
  3. Check motor FLA for proper drive sizing

480V

Catalog Model Number
Drive Model Number
Rated Output Current (Amps)
Nominal HP2
Standard Enclosure
CIMR-G7U40P41
CIMR-G7U40P41A
CIMR-G7U40P41B
1.8
3/4
NEMA 1
CIMR-G7U40P71
CIMR-G7U40P71A
CIMR-G7U40P71B
3.4
1
NEMA 1
2
CIMR-G7U41P51
CIMR-G7U41P51A
CIMR-G7U41P51B
4.8
3
NEMA 1
CIMR-G7U42P21
CIMR-G7U42P21A
CIMR-G7U42P21B
6.2
33
CIMR-G7U43P71
CIMR-G7U43P71A
CIMR-G7U43P71B
9
5
NEMA 1
CIMR-G7U44P01
CIMR-G7U44P01A
CIMR-G7U44P01B
11
7.5
CIMR-G7U45P51
CIMR-G7U45P51A
CIMR-G7U45P51B
15
10
NEMA 1
CIMR-G7U47P51
CIMR-G7U47P51A
CIMR-G7U47P51B
21
15
CIMR-G7U40111
CIMR-G7U40111A
CIMR-G7U40111B
27
20
NEMA 1
CIMR-G7U40151
CIMR-G7U40151A
CIMR-G7U40151B
34
25
CIMR-G7U40181
CIMR-G7U40181A
CIMR-G7U40181B
42
30
NEMA 1
CIMR-G7U40221
CIMR-G7U40221A
CIMR-G7U40221B
52
40
CIMR-G7U40301
CIMR-G7U40301A
CIMR-G7U40301B
65
50
NEMA 1
CIMR-G7U40371
CIMR-G7U40371A
CIMR-G7U40371B
80
60
CIMR-G7U40451
CIMR-G7U40451A
CIMR-G7U40451B
97
75
CIMR-G7U40550
CIMR-G7U40550A
CIMR-G7U40550B
128
100
Protected Chassis
CIMR-G7U40750
CIMR-G7U40750A
CIMR-G7U40750B
165
125
CIMR-G7U40900
CIMR-G7U40900A
CIMR-G7U40900B
195
150
Protected Chassis
CIMR-G7U41100
CIMR-G7U41100A
CIMR-G7U41100B
240
200
CIMR-G7U41320
CIMR-G7U41320A
CIMR-G7U41320B
270
2003
Protected Chassis
CIMR-G7U41600
CIMR-G7U41600A
CIMR-G7U41600B
302
250
CIMR-G7U41850
CIMR-G7U41850A
CIMR-G7U41850B
370
300
Protected Chassis
CIMR-G7U42200
CIMR-G7U42200A
CIMR-G7U42200B
450
350
CIMR-G7U43000
CIMR-G7U43000A
605
400
Protected Chassis
500

Product manuals

# File Description Date added File size Downloads
1 pdf FL.G7.01 09/29/2017 16:00 201 KB 111