Yokogawa EJA210E Flange Mounted Differential Pressure Transmitter

Yokogawa EJA210E

The EJA-E series of transmitters is Yokogawa’s most recent evolution of the DPharp family of pressure transmitters. Released in 2012, it combines the ruggedness and success of the work-horse EJA-A series with the performance of the thoroughbred EJX-A series to deliver the type of product you have come to expect from Yokogawa.

The EJA210E is the Flange-mount Liquid Level Transmitter in the series.

EJA210E features include:

  • ± 0.075% Accuracy
  • ± 0.1% per 1 year Stability
  • 120 msec Response Time
  • Exida and TUV SIL2 / SIL3 Certified
  • Signal Characterizer for the 4 to 20 mA output
  • Local Parameter Setting (LPS)

Our Main Business on :EJA210E,EJX210A,EJXC40A,EJXC80A, EJAC80E (Diaphragm Seal),EJXC80A, EJAC80E (Direct Mounted),EJXC50A, EJAC50E…All the Yokogawa Pressure Transmitter we sell Made in Japan! 100% Original!

The high performance flange mounted differential pressure transmitter EJA210E can be used to measure levels of densities of solidifying or precipitating liquids. EJA210E outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its accurate and stable sensor can also measure the static pressure which can be shown on
the integral indicator or remotely monitored via BRAIN or HART communications. Other key features include quick response, remote set-up using communications and self-diagnostics. FOUNDATION Fieldbus, PROFIBUS PA and 1 to 5 V DC with HART (Low Power) protocol types are also available. All EJA-E series models in their standard configuration, with the exception of the Fieldbus, PROFIBUS and Low Power types, are certified as complying with SIL 2 for safety requirement.

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

ROSEMOUNT 5300 SERIES – TEST and MEASUREMENT

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

Yokogawa EJA120A Draft Range Differential Pressure Transmitter

Load more