Yokogawa EJX630A In-Line Mount High Perfomance Gauge Pressure Transmitter

The EJX-A series is Yokogawa’s premium performance line of DPharp transmitters. Released in 2004, it offers the performance and stability needed in demanding applications. The EJX-A series performance makes it the the thoroughbred of the DPharp family of pressure transmitters.

The EJX630A is the high performance In-Line Mount Gauge Pressure Transmitter in the series.

EJX630A standard features include:

  • ± 0.04% Accuracy (Optional 0.025% Accuracy)
  • ± 0.1% per 15 years Stability
  • 90 ms Response Time
  • 15,200 psi
  • Exida and TUV SIL 2/3 Certified
  • Local Parameter Setting (LPS)

Our Main Business on :EJA430E EJX430A EJA438E EJX438A EJA440E EJX440A EJA530E EJX530A EJX630A EJXC40A EJXC80A, EJAC80E (Diaphragm Seal) EJXC80A, EJAC80E (Direct Mounted) EJXC50A, EJAC50E…All the Yokogawa Gauge Pressure Transmitter we sell Made in Japan! 100% Original!

Plants run better with Yokogawa pressure transmitters.

Digital Performance

Digital Performance

Poor Performance = Lost Money

Installed performance 2x better using all digital DPharp pressure sensor.

Yokogawa’s digital sensor provides superior performance and stability compared to analog sensors.


Dynamic Compensation

Compensates for process changes to improve accuracy.


More Information

Local Indicator

Easy to read indicator provides all the information you need.


Self Diagnostics

Standard Diagnostics

Good Diagnostics = Less Surprises

Reduce unscheduled maintenance by 60%

Over 40 diagnostics to ensure everything is OK. Active Sensor Technology monitors the DPharp sensor while the Patented Back-check Technology is reverse checking all calculations in real-time.


Advanced Diagnostics

Reduce unscheduled maintenance by 60%.

Predictive impulse line blocking and stream tracing diagnostics lets you see problems before they happen.

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

ROSEMOUNT 5300 SERIES – TEST and MEASUREMENT

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

Yokogawa EJA120A Draft Range Differential Pressure Transmitter

Load more