Yokogawa Rail Mount Temperature Transmitter YTA70 YTA50 YTA70P

Rail-mount temperature transmitters are designed to be mounted on DIN-rails located in non-harsh enviroments usually in or near control rooms. The advantage of this type of mounting is that they can be grouped together for easy access. The disadvantage is the length of  wiring from the sensor to the transmitter.

YTA70

YTA70 thumbnailLike the YTA50, the YTA70 is a 2-wire analog temperature transmitter that outputs a simple 4 to 20 mA output that correspondes to the temperature measured. However, it adds HART® 5 (Code -E) or selectable HART® 5 or HART® 7 (Code -J) digital communication.

YTA50

YTA50 thumbnailThe YTA50 is a 2-wire analog temperature transmitter that outputs a simple 4 to 20 mA output that correspondes to the temperature measured.

YTA70P

YTA70P thumbnailSuitable for applications requiring high-density measurement points, the YTA70P is designed to be fitted on a DIN rail mounting in a field junction box. The YTA70P is an analog temperature transmitter that outputs a simple 4 to 20 mA analog output anda HART® 7 digital output.

YTT002.a

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

ROSEMOUNT 5300 SERIES – TEST and MEASUREMENT

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

Yokogawa EJA120A Draft Range Differential Pressure Transmitter

Load more