Yokogawa Temperature Transmitters(Field/Head/Rail) Mount

Temperature transmitters feature significant advances over the direct wired counterparts. Eliminate special cabling requirements, simplify engineering and maintenance while enabling advanced diagnostics. Yokogawa offers head-mount, panel-mount, and field-mount devices to cover different temperature applications.

Field Mount

Field Mount

Field-mount temperature transmitters are designed to operate in the harshest environments.

Head Mount

Head mount transmitters offer a less expensive way to make industrial temperature measurements.

Rail Mount

Rail-mount temperature transmitters are designed to be mounted on DIN-rails located in non-harsh enviroments. With the mounting style, the transmitters can be grouped together for easy access.

Our Main Business on :YTA610 YTA710 YTA110 YTA310 YTA320 YTA50 YTA70 YTA70P… All the Yokogawa Temperature Transmitter we sell Made in Japan! 100% Original!

Yokogawa Industrial Temperature Measurment

Temperature is one of the four basic process measurements (others being Pressure, Level, and Flow). Temperature measurements are used in an array of different applications. Inaccuracy of a temperature reading can have an impact on the bottom line.

For example, if a controller is maintaining water temperature at 100°F in a process and the temperature measurement getting back to the controller is just 1°F below the actual temperature, the controller will increase the energy to the process to get it to 100°F (although it is really not needed.) How much will this wasted energy cost you per year? Of course, it depends how much water we are talking about, but, if you’re using 100,000+ per year, is it costing $8,000/year? $10,000/year?  or more? The cost of a small measurement inaccuracy (just 1°F) is very real yet often overlooked.

You can see that it is important to have a good understanding of temperature measurement. The following sections will cover the basics of temperature sensors and why the use of a temperature transmitter is useful.

Temperature Transmitters Sensors

There have been numerous sensors developed through the years. All of them infer temperature through some change in a physical characteristic of the sensor. A good example is a Mercury thermometer. The volume of mercury (the physical characteristic) changes in a predictable way as temperature changes. Knowing the predictable change allows us to construct a thermometer with a visual scale that we can read the temperature from. But, in industrial application, we need something more accurate than the mercury thermometer. The more common sensors used in industrial applications are Resistive Temperature Detectors (RTD) and Thermocouples (T/C).

What are the differences between an RTD and a Thermocouple?

RTDs are made from a single material whose electrical resistance changes as temperature changes. Knowing the relationship between resistance and temperature allows us to infer the temperature measured. A common material used for RTDs is Platinum; but, other materials are used as well. Platinum has a stable well-defined resistance change per degree temperature change over a wide temperature envelope. The advantage of RTDs is the stable accurate output over a long period of time. Disadvantages are their initial higher cost and limited measurement envelope when compared to thermocouples (Refer to graph below).

Thermocouples are made from two dissimilar electrical conductors that are joined at one end. Changes in temperature at the connection point of the two materials cause a voltage to be generated between them. Knowing the relationship between the generated voltage and temperature allows us to infer the temperature measured. Thermocouples are made out of several different materials combinations. Each combination has a different temperature envelope. Thermocouples are more rugged, less expensive, faster responding and have larger measurement envelopes when compared to RTDs; but, are not as stable and accuracy degrades over time.

Thermocouples are the more commonly used of the two.

TIG001.b

Temperature Transmitters

As with all field instruments, the purpose of taking a temperature reading is to get that information back to the controller / monitor in a timely manner, accurately, and reliably.

TIG002.b

RTDs and Thermocouples can be wired directly to the receiving device.

So, why use a temperature transmitter?

Each type of sensor has unique challenges directly wiring to the receiving device. Generally, this method will have a negative effect on the accuracy and reliability of the sensor signal.

RTDs use extension wires. These wires add resistance to the RTDs signal. Since RTDs use resistance to measure temperature, any resistance not contributed to temperature will cause an error when it reaches the receiving device. The “extra” resistance can be compensated for using a 3-wire or 4-wire RTDs. These extra wires are used to measure the resistance in the wiring. The receiving device can use the information to compensate for the extra resistance. But you are left with runs of 3 or 4-wire cabling. This cabling can cost you up to twice as much as regular 2-wire cable.

Thermocouples require special wiring to connect the thermocouple to the receiving device. This wiring must be made from the same materials as the thermocouple itself. If wiring with a different material is used, the receiving device will receive a corrupted signal. Ensuring that the special wiring is available during installation and maintaining a supply for later maintenance adds a layer complexity to a thermocouple use. Cost of this special wiring is also a consideration (especially with long wiring runs).

Temperature Transmitters resolve these problems. The transmitter can be placed close to the sensor to reduce the special wiring required, thus reducing any potential error. The transmitter converts the sensor signal to a signal that can be transmitted a greater distance. This signal can be a simple 4 to 20mA DC analog signal, digital signal (Hart® Protocol, BRAIN Protocol, or FOUNDATION™ Fieldbus Protocol), or a wireless signal (ISA100). The transmitter gets a reliable accurate signal to the desired receiving device using standard twisted pair or, in the case of a wireless transmitter, no wires at all.

Getting the information back to the controller / monitor in a timely manner, accurately, and reliably.

TIG003.b

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

ROSEMOUNT 5300 SERIES – TEST and MEASUREMENT

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

Yokogawa EJA120A Draft Range Differential Pressure Transmitter

Load more