Yokogawa YTA610 Temperature Transmitter

YTA610 Temperature Transmitter

The YTA610 provides high accuracy, stability, and reliability. The housing structure adopts reliable dual-compartment structure. The sensor input can be choice of single or dual inputs. This input can accept the RTD, thermocouple, ohm, or DC millivolt. It converts the sensor input to a 4 to 20 mA DC analog signal or Fieldbus digital signal. HART® 7 Protocol or FOUNDATION™ Fieldbus ITK 6 version are available. The dual input can accept two sensors calculation of the differential or average value and the sensor backup function. Sensor backup functions for automatically switches-over from the primary to the backup upon sensor failure.
By adoption of local parameter switch on the Indicator, it becomes easy to do the on-site setting work.

YTA610 features include:

  • Dual-compartment field-mount housing
  • Choice of HART® 7, or FOUNDATION™ Fieldbus ITK 6 Protocol
  • Local Parameter Setting function (Indicator model)
  • Basic diagnosis

Our Main Business on :YTA610 YTA710 YTA110 YTA310 YTA320 YTA50 YTA70 YTA70P… All the Yokogawa Temperature Transmitter we sell Made in Japan! 100% Original!

Communications

The YTA610 has 4 to 20 mA analogue output signal with HART® 7 digital protocol or full digital FOUNDATION™ Fieldbus protocol.

YTA610 Communications

Dual sensor input

The YTA610 in capable of dual sensor input. With the processing capability of the transmitter, this dual input can be used to provide Failed Sensor Backup, Temperature Averaging, or Differential Temperature measurement.

Sensor Matching

The Yokogawa YTA610 uses the IEC60751 standard to define the relationship between resistance and temperature for RTD sensors. This relationship is referred to as a Standard Curve. Sensor manufacturers use this same standard, but, because of construction process, each sensor has a unique temperature / resistance relationship. This is referred to as the Real RTD Curve. (The Real RTD Curve falls within the tolerance band of IEC60751 standard) In the 1920’s, Hugh Longbourne Callendar and M.S. Van Dusen developed a set of coefficients that would modify the Standard Curve to match the Real RTD Curve; thus, removing the error generated by the difference between the two curves. Yokogawa’s YTA610 with the CM1 option can accept these coefficients to adjust the Standard Curve to match the Real RTD Curve of the sensor; eliminating this error improves the accuracy of the YTA610 / Sensor system.

YTT998.b

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

ROSEMOUNT 5300 SERIES – TEST and MEASUREMENT

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

Yokogawa EJA120A Draft Range Differential Pressure Transmitter

Load more