When a position in remote I/O networks has to be filled with the original part, the 5604-RIO-PDPMV1 is what goes back in. It lets a Rockwell remote I/O network appear as a PROFIBUS DP slave to a Siemens master. The conversion path is Rockwell Automation Remote I/O to PROFIBUS DPV1 Master. The datasheet quotes 24 V DC supply.
| Model | 5604-RIO-PDPMV1 |
|---|---|
| Manufacturer | ProSoft Technology |
| Module type | Stand-alone protocol gateway |
| Function | Remote I/O to PROFIBUS DP master conversion |
| Ethernet ports | Two, for the remote I/O side and the configuration PC |
| Fieldbus port | PROFIBUS DP, RS-485 |
| Transmission rate | Up to 12 Mbit/s on PROFIBUS |
| Configuration tool | ProSoft Configuration Builder over Ethernet |
| Configuration storage | On board, retained across power cycles |
| Supply voltage | 24 V DC |
| Mounting | DIN rail or panel |
| Diagnostics | Status LEDs and a web diagnostic page |
| Operating temperature | 0 … 60 °C |
| Certifications | CE, UL |
| Dimensions (W×H×D) | Not available |
| Weight | Not available |
| Product family | ProSoft remote I/O gateway |
| Product type | PLC Communication Module |
| Condition | Used, tested and cleaned |
| Packaging | Anti-static bag with foam protection |
| Stock Status | In stock, subject to prior sale |
| Country Of Origin | Not available |
| Warranty | 12 months |
Position in the installation
It goes onto a 35 mm DIN rail. Configuration is done in ProSoft Configuration Builder over Ethernet. The working range is 0 … 60 °C.
Matching it to the machine
The I/O map is built in the gateway configuration and has to match the master, so the mapping file is the part that matters. A photo of the old label is usually enough for us to confirm the suffix before you commit to the order.
Typical applications
Two control systems from different vendors that have to exchange I/O without a common protocol. They are used in plants where an existing Rockwell I/O network has to be folded into a PROFIBUS-controlled line.
For export the unit is packed in an anti-static bag with foam corner protection and shipped in a double-wall carton. The commercial invoice carries the original order number, which keeps the part booked against the right maintenance line.
Label the serial and Ethernet cables before unplugging them, because a gateway with two ports is easy to wire back the wrong way round. Units come from service stock, are tested on the bench and packed with foam protection. If the label is unreadable, send a photo of the part and its slot and we will identify it for you.













