Industry automation over 20 year

[email protected]

24/7 Customer Support

Mon - Fri: 8:30 - 21:00

Online Store always open

** COVID-19 ** AoteWell Automation are still Working and shipping worldwide

Home / Schneider / Inverter / ATV71​ / ATV71HD30N4

If you need a specific firmware or series relating to ATV71HD30N4 we probably have it. Please call or email us with your request.

Share on facebook
Share on google
Share on twitter
Share on linkedin
  • Part Number: ATV71HD30N4
  • Model Number: ATV71HD30N4
Schneider ATV71HD30N4 Inverter​ 380…480 V 3 phases, 56A, 30 kW, 50/60hZ, 40hP​
Schneider Altivar 71 Variable speed drive ATV71HD30N4 30 kW at 380...480 V 3 phases 40 hp at 380...480 V 3 phases
Part Number:ATV71HD30N4 Family/Series:ATV71
Product Type:InverterCategory:Home/Inverters/Schneider Inverters/ATV71
Plance of Origin:Made in GermanyProduct Status:Current Product
Warranty: 

At Aotewell we can provide you with a brand Factory new covered by the Original Manufacturers Warranty.

  • OEM warranty
  • Competitive prices
  • Free quotation


* Equipment is subject to availability.  In Stock

Buying a Used Parts can offer great savings over brand new and at Aotewell all our Used spares are covered by our comprehensive 12 month warranty, giving you complete peace of mind. Our utmost for your project cost savings.

  • Free 6~18 months whole of unit warranty
  • Competitive prices
  • Free quotation


* Equipment is subject to availability.   In Stock

Buying a refurbished can offer great savings over brand new and at Aotewell all our refurbished spares are covered by our comprehensive 12 month warranty, giving you complete peace of mind.

  • Free 12 months whole of unit warranty
  • Competitive prices
  • Free quotation


* Equipment is subject to availability.   In Stock

Repair this product  ATV71HD30N4

Do you have this product ATV71HD30N4 is it damaged in the process of use in the factory, are you looking for experts to repair it, then you find you are the right choice, contact us now, we will repair this product for you, help you reduce the cost.

We can Repair this product ATV71HD30N4 quick.

The quickest and most cost effective solution to your problem is often our Service Exchange service. Send us your old and we will replace it with a refurbished one, all covered by our comprehensive 12 month warranty

  • Free 12 months whole of unit warranty
  • Competitive prices
  • Free quotation


* Equipment is subject to availability.

Please upload your inquiry list

GLOBAL SHIPPING

ATV71HD30N4 Shipping from HongKong

LOWEST PRICES

ATV71HD30N4 30-50% discount off from us

QUICK DELIVERY

Large inventory & Fast Delivery,Waiting for shipment.

SPARE PARTS

Large supply of spare parts supply, and accept the reservation.

Buy Schneider Altivar 71 AC Inverters ATV71HD30N4 380-480V 30KW

Schneider Altivar 71 Variable speed drive ATV71HD30N4

range of product
Altivar 71
product or component type
Variable speed drive
product specific application
Complex, high-power machines
component name
ATV71
motor power kW
30 kW at 380…480 V 3 phases
motor power hp
40 hp at 380…480 V 3 phases
motor cable length
<= 100 m Shielded cable
<= 200 m Unshielded cable
[Us] rated supply voltage
380…480 V (- 15…10 %)
network number of phases
3 phases
line current
56 A for 480 V 3 phases 30 kW / 40 hp
66 A for 380 V 3 phases 30 kW / 40 hp
EMC filter
Integrated
assembly style
With heat sink
apparent power
43.4 kVA at 380 V 3 phases 30 kW / 40 hp
prospective line Isc
<= 22 kA, 3 phases
nominal output current
52 A at 4 kHz 460 V 3 phases 30 kW / 40 hp
66 A at 4 kHz 380 V 3 phases 30 kW / 40 hp
maximum transient current
109 A for 2 s 3 phases 30 kW / 40 hp
99 A for 60 s 3 phases 30 kW / 40 hp
output frequency
0.1…599 Hz
nominal switching frequency
4 kHz
switching frequency
1…16 kHz adjustable
4…16 kHz with derating factor
asynchronous motor control profile
Voltage/frequency ratio (2 or 5 points)
Flux vector control (FVC) with sensor (current vector)
Sensorless flux vector control (SFVC) (voltage or current vector)
ENA (Energy adaptation) system for unbalanced loads
type of polarization
No impedance for Modbus
Complementary
product destination
Asynchronous motors
Synchronous motors
supply voltage limits
323…528 V
supply frequency
50…60 Hz (- 5…5 %)
network frequency
47.5…63 Hz
speed range
1…100 for asynchronous motor in open-loop mode, without speed feedback
1…50 for synchronous motor in open-loop mode, without speed feedback
1…1000 for asynchronous motor in closed-loop mode with encoder feedback
speed accuracy
+/- 0.01 % of nominal speed for 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback
+/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback
torque accuracy
+/- 15 % in open-loop mode, without speed feedback
+/- 5 % in closed-loop mode with encoder feedback
transient overtorque
220 % of nominal motor torque +/- 10 % for 2 s
170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
braking torque
<= 150 % with braking or hoist resistor
30 % without braking resistor
synchronous motor control profile
Vector control without speed feedback
regulation loop
Adjustable PI regulator
motor slip compensation
Not available in voltage/frequency ratio (2 or 5 points)
Adjustable
Suppressable
Automatic whatever the load
local signalling
1 LED red presence of drive voltage
output voltage
<= power supply voltage
insulation
Electrical between power and control
type of cable
With a NEMA Type1 kit : 3-strand UL 508 cable at 40 °C, copper 75 °C PVC
With an IP21 or an IP31 kit : 3-strand IEC cable at 40 °C, copper 70 °C PVC
Without mounting kit : 1-strand IEC cable at 45 °C, copper 70 °C PVC
Without mounting kit : 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR
electrical connection
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1…LI6, PWR terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 50 mm² / AWG 1/0
tightening torque
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 12 N.m / 102.2 lb.in
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1…LI6, PWR 0.6 N.m
supply
Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protection
Internal supply, 24 V DC, voltage limits 21…27 V, <= 200 mA for overload and short-circuit protection
analogue input number
2
analogue input type
AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
AI2 software-configurable current 0…20 mA, impedance 242 Ohm, resolution 11 bits
AI2 software-configurable voltage 0…10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
sampling duration
AI1-/Al1+ 2 ms, +/- 0.5 ms for analog input(s)
Al2 2 ms, +/- 0.5 ms for analog input(s)
LI1…LI5 2 ms, +/- 0.5 ms for discrete input(s)
LI6 (if configured as logic input) 2 ms, +/- 0.5 ms for discrete input(s)
response time
<= 100 ms in STO (Safe Torque Off)
AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)
R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)
R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
accuracy
AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C
AI2 +/- 0.6 % for a temperature variation 60 °C
AO1 +/- 1 % for a temperature variation 60 °C
linearity error
AI1-/Al1+, AI2 +/- 0.15 % of maximum value
AO1 +/- 0.2 %
analogue output number
1
analogue output type
AO1 software-configurable current 0…20 mA, impedance 500 Ohm, resolution 10 bits
AO1 software-configurable logic output 10 V <= 20 mA
AO1 software-configurable voltage 0…10 V DC, impedance 470 Ohm, resolution 10 bits
discrete output number
2
discrete output type
R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles
R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
minimum switching current
Configurable relay logic 3 mA at 24 V DC
maximum switching current
R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1,
R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1,
R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4,
R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4,
discrete input number
7
discrete input type
LI6 : switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
PWR : safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
LI1…LI5 : programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
LI6 : switch-configurable PTC probe 0…6, impedance: 1500 Ohm
discrete input logic
LI1…LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI1…LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0)
LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0)
acceleration and deceleration ramps
Linear adjustable separately from 0.01 to 9000 s
Automatic adaptation of ramp if braking capacity exceeded, by using resistor
S, U or customized
braking to standstill
By DC injection
protection type
Drive against exceeding limit speed
Drive against input phase loss
Drive break on the control circuit
Drive input phase breaks
Drive line supply overvoltage
Drive line supply undervoltage
Drive overcurrent between output phases and earth
Drive overheating protection
Drive overvoltages on the DC bus
Drive short-circuit between motor phases
Drive thermal protection
Motor motor phase break
Motor power removal
Motor thermal protection
insulation resistance
> 1 mOhm at 500 V DC for 1 minute to earth
frequency resolution
Analog input 0.024/50 Hz
Display unit 0.1 Hz
communication port protocol
CANopen
Modbus
type of connector
1 RJ45 for Modbus on front face
1 RJ45 for Modbus on terminal
Male SUB-D 9 on RJ45 for CANopen
physical interface
2-wire RS 485 for Modbus
transmission frame
RTU for Modbus
transmission rate
20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
9600 bps, 19200 bps for Modbus on front face
data format
8 bits, 1 stop, even parity for Modbus on front face
8 bits, odd even or no configurable parity for Modbus on terminal
number of addresses
1…247 for Modbus
1…127 for CANopen
method of access
Slave for CANopen
marking
CE
operating position
Vertical +/- 10 degree
height
550 mm
depth
266 mm
width
240 mm
product weight
37 kg
functionality
Full
specific application
Other applications
option card
CC-Link communication card
Controller inside programmable card
DeviceNet communication card
Ethernet/IP communication card
Fipio communication card
I/O extension card
Interbus-S communication card
Interface card for encoder
Modbus Plus communication card
Modbus TCP communication card
Modbus/Uni-Telway communication card
Overhead crane card
Profibus DP communication card
Profibus DP V1 communication card
Environment
noise level
64 dB conforming to 86/188/EEC
dielectric strength
3535 V DC between earth and power terminals
5092 V DC between control and power terminals
electromagnetic compatibility
Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
1.2/50 µs – 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
standards
EN 55011 class A group 2
EN/IEC 61800-3
IEC 60721-3-3 class 3S2
EN/IEC 61800-5-1
EN 61800-3 environments 2 category C3
EN 61800-3 environments 1 category C3
IEC 60721-3-3 class 3C1
UL Type 1
product certifications
C-Tick
NOM 117
GOST
CSA
UL
pollution degree
2 conforming to EN/IEC 61800-5-1
3 conforming to UL 840
IP degree of protection
IP20
vibration resistance
1.5 mm peak to peak (f = 3…13 Hz) conforming to EN/IEC 60068-2-6
1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity
5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3
ambient air temperature for operation
-10…50 °C without derating
ambient air temperature for storage
-25…70 °C
operating altitude
<= 1000 m without derating
1000…3000 m with current derating 1 % per 100 m

ATV71HD30N4  Application for Textile machinery

End user is Oil and gas, Rail traffic

Application areas of the Schneider ATV71HD30N4 include:

ProjectProject

Special machines

Controller building

Textile machines

Machine tool manufacture

Packaging machines

Installation systems

Pick-and-place machines

Electrical/electronics industry and the skilled trades

Assembly machines

Automotive

Palleting machines

Water/wastewater

General mechanical engineering

Food & beverage

ATV71HD30N4 pdf data sheet & document、Manual

 

Version and firmware

ATV71HD30N4 -A

ATV71HD30N4 -B

ATV71HD30N4 -C

ATV71HD30N4 -D

ATV71HD30N4 -F

 

ATV71HD30N4 -V1.x.x

ATV71HD30N4 -V2.x.x

ATV71HD30N4 -V3.x.x

ATV71HD30N4 -V4.x.x

ATV71HD30N4 -V5.x.x..or higher

AoteWell Automation, Being Exporter and Manufacturer of High Quality Schneider ATV71HD30N4  provide all type of supports and services in following cities and industrial.

• Mumbai, Maharashtra • Pune, Maharashtra • Ahmadabad, Gujarat • Vapi • Surat • Vadodara • Chennai • Vishakhapatnam • Kollam • Hubli • Coimbatore • Delhi / New Delhi • Chhotanagpur • Kolkata • Ahmedabad • Bengaluru • Bhopal • Bhubaneswar • Chandigarh • Coimbatore • Gurgaon • Hyderabad • Jaipur • Jamshedpur • Kharghar • Kolkata • Lucknow • Kochi • Nagpur • Navi Mumbai • New Delhi • Puducherry • Vadodara• Visakhapatnam

AoteWell Automation, Exporter and Manufacturer of High Quality Schneider ATV71HD30N4 . We have successfully completed installations and can provide better after sales services in following countries / Cities.

About AoteWell

AoteWell  automation supplies distributor, supplier, vendor, wholesaler, marketer, stockist of the best   ATV71HD30N4 in lowest price in China, top 10 distributor Schneider ATV71HD30N4 in China, USA. UK. dubai, myanmar, sri lanka, colombo, dhaka, Peru, Ecuador, Chile, Mexico, Belgium, United Arab Emirates, Denmark, Bolivia, Slovakia, South Africa, Netherlands, Croatia, Spain, Hungary, Czechia, Thailand, Bangladesh, Turkey, Colombia, Norway, Vietnam, Poland, China, Romania, Taiwan, Austria, Philippines, Venezuela, Indonesia, Saudi Arabia, South Korea, Malaysia, Egypt, Sweden, oman and many countries and cities in the word.  

The service and product which we provide and trade are Schneider Schneider, Schneider ATV71HD30N4 brochure,  Inverter Schneider ATV71HD30N4 , Schneider ATV71HD30N4 catalog, Schneider ATV71HD30N4 manual, Schneider ATV71HD30N4 manual pdf, Schneider ATV71HD30N4 price, Schneider Schneider programming, harga Schneider Schneider, odk Schneider ATV71HD30N4 Inverter , Schneider  ATV71HD30N4 cost, Schneider ATV71HD30N4 manual, Schneider ATV71HD30N4 price, Schneider ATV71HD30N4 datasheet, Schneider ATV71HD30N4 programming manual, Schneider ATV71HD30N4 starter kit, Schneider Inverter ,ATV71HD30N4 user manual, Schneider ATV71HD30N4 wiring diagram, Schneider ATV71HD30N4 Inverter

ATV71HD30N4 total weight is  45 kg

ATV71HD30N4 shipping by DHL-Express, TNT-Express

ATV71HD30N4 Size (LxHxW)mm is: 550 MM X 266 mm X 240 mm

ATV71HD30N4  ship worldwide.

The fastest and the most competitive service, regardless of size and weight.

We use global companies that are fast and reliable (UPS, DHL, FedEx, TNT and DPD)

Express delivery is available

We can ship on the customer’s shipping account

Normal shipping time

HK/Singapore 1 day

Europe, USA, and Canada 3-5 days By Express service

The rest of the world: 5-7 days By Express service

All New \Used and refurbished parts are enjoying Automation Automation over 12 months warranty
Schneider ATV71HD30N4   New item 24 months
Schneider ATV71HD30N4   Used Item 12 months
Schneider ATV71HD30N4   Refurbished item 18 months

ASK: How to buy ATV71HD30N4   this item ?
Reply: We accept order type as below:  Online Ordering 

ASK: What is the shipping cost about this item ATV71HD30N4  ?
Reply: Freight depends on your address and the weight of the product, please contact us, we will provide you with the best quality service, the most economic transport costs

ASK: About the warranty period of this product?
Reply:  

ASK: About the country of origin of ATV71HD30N4  this product ?
Reply: This Parts Made in Germany  

ASK:Do you offer firmware upgrade service ?

Our engineers provide firmware upgrade service for this part ATV71HD30N4  

ATV71HD30N4 's Real photos

Need ATV71HD30N4 's Service ?

Seller Serices

9/10

Customer feedback

8.9/10

Speed of reply to inquiries

John Dow
John Dow@Johndoe
Read More
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Susan Li
Susan Li@susanli
Read More
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Monhand
Monhand@monhand
Read More
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Previous
Next

Enquiry about ATV71HD30N4 item? Contact to get a best discount Now!

RFQ ATV71HD30N4

Business Partner

Share on facebook
Share on google
Share on twitter
Share on whatsapp
Share on skype