SIMOREG CM Design
The 6RA70 Control Module is characterized by its compact, space-saving design. The compact construction makes it especially easy to service since individual components
are easily accessible. The electronics box contains the basic electronics as well as any supplementary boards.
To support optimum utilization of the installation possibilities in the system, the 6RA70 Control Module can be separated in its depth. Furthermore, the PCBs for firing pulse generation and distribution as well as for fuse monitoring and voltage measurement
are designed to be removed and mounted either partially or completely outside
the unit directly on the power section and connected to the basic unit via cables.
All 6RA70 Control Modules are equipped with a PMU simple operator panel in the door of the unit. The PMU consists of a fivedigit, seven-segment display, three LEDs as status indicators and three parameterization keys. The PMU also features connector X300 with a USS interface in compliance with the RS232 or RS485 standard.
The panel provides all the facilities required during start-up for making adjustments or settings and displaying measured values.
The optional OP1S converter operator panel can be mounted either in the converter door or externally, e.g. in the cubicle door. For this purpose, it can be connected up by means of a 5 m long cable. Cables of up to 200 m in length can be used if a separate 5 V supply is available.
The OP1S is connected to the SIMOREG CM unit via connector X300.
The OP1S can be installed as an economic alternative to control cubicle measuring instruments which display physical measured quantities. The OP1S features an LCD with
4 x 16 characters for displaying parameter names in plain text. English, German, French, Spanish and Italian can be selected as the display languages.
The OP1S can store parameter sets for easy downloading to other devices.
The converter can also be parameterized via the serial interface of the basic unit by means of a generally available PC and appropriate software. This PC interface is used for start-up, for maintenance during shutdown and for diagnosis during operation and is, therefore, a service interface. Upgrades of the converter software that is stored in Flash memory can also be loaded via this interface.
The field is supplied by a singlephase, semi-controlled dual pulse bridge connection B2HZ. The power section for the field is constructed with galvanically isolated thyristor modules; the heat sink is therefore at floating potential.