SITRANS TH100 Temperature Measurement | Head TransmitterSITRANS TH100 is rigid designed for economic use. For example with saving of the galvanic insulation, which is not need for PT100. Therefore the TH100 offers economic plant operation and reliable measurements. It is an ideal substitute for over aged analogue PT100 transmitters. Setup is quick and easy with the transmitter-modem and SIPROM T. This configuration tool can be downloaded for free.
Benefits
Measures temperature with a linear output signal
High accuracy across entire ambient temperature range
Reduces plant noise
Alarm signal for sensor break or short circuit according NAMUR 43
Explosion protected executions for US, Canada and Europe
Slim design, ideal for upgrade of installed PT100 probes with a 4-..20mA signal
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output
4 to 20 mA
SITRANS TH200 Temperature Measurement | Head Transmitter
SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt-sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-..20mA loop, the output current can read directly with a multimeter. A red/green LED shows the technician the status at a glance.
Benefits
Measures temperature with a linear output signal
high accuracy across entire ambient temperature range
reduces plant noise
Alarm signal for sensor break or short-circuit according NAMUR 43
Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
Saves expensive compensation cables with the internal reference junction
Galvanic insulation for accuracy and safety in thermocouple applications
Single- or dual-point trim
Custom characteristic curve for application of non-standard sensors
Difference- and average- measurement
Explosion protected executions for US, Canada and Europe
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output
4 to 20 mA, HART
SITRANS TH300 Temperature Measurement | Head Transmitter
SITRANS TH300 with HART- protocol is designed to support all common thermocouples, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4..20mA loop the output current can read out directly with a multimeter. A red/green LED shows the technician the status at a glance.
Benefits
Measures temperature with a linear output signal
High accuracy across entire ambient temperature range
reduces plant noise
Alarm signal for sensor break or short-circuit according NAMUR 43
Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
Save expensive compensation cables with internal reference junction
Galvanic insulation for accuracy and safety in thermocouple applications
Single- or dual-point trim
Custom characteristic curve for application of non-standard sensors
Difference- and average- measurement
Extensive diagnosis: e.g. drag indicator and time meter
Set of output current for simulation
Explosion protected executions for US, Canada and Europe
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output
PROFIBUS PA (variant), Foundation Fieldbus (variant)
SITRANS TH400 Temperature Measurement | Head Transmitter
SITRANS TH400 is available either with PROFIBUS PA or FOUNDATION Fieldbus (FF). It is designed to support all common RTD, thermocouple, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM(PA) or AMS and handheld communicator(FF). Due to its small size, the device allows flexible mounting options, even in a DIN Type B connection head.
Benefits
Linearization of the sensor values
High accuracy across entire ambient temperature range
Reduces plant noise
Alarm signal for sensor break or short-circuit
Electromagnetic compatibility (EMC) according DIN EN 61326 and NE21
Saves expensive compensation cables with internal reference junction
Galvanic isolation for accuracy and safety in thermocouple applications
Single- or dual-point trim
Custom characteristic curve for application of non-standard sensors
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output
4 to 20 mA
SITRANS TR200 Temperature Measurement | Rail Transmitter
SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.
Benefits
Measures temperature with a linear output signal
high accuracy across entire ambient temperature range
Reduces plant noise
Alarm signal for sensor break or short-circuit according NAMUR 43
Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
Galvanic insulation for accuracy and safety in thermocouple applications
Single- or dual-point trim
Custom characteristic curve for application of non-standard sensors
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output
4 to 20 mA, HART
SITRANS TR300 Temperature Measurement | Rail Transmitter
SITRANS TR300 with HART- protocol is designed to support all commons, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4-20mA loop the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.
Benefits
Measures temperature with a linear output signal
High accuracy across entire ambient temperature range
Reduces plant noise
Alarm signal for sensor break or short-circuit according NAMUR 43
Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
Galvanic insulation for accuracy and safety in thermocouple applications
Single- or dual-point trim
Custom characteristic curve for application of non-standard sensors
Difference- and average- measurement
Extensive diagnosis: e.g. drag indicator and time meter
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources, Current sources
0/4 to 20 mA, HART
0/2 to 10 V, HART
SITRANS TW Temperature Measurement | Rail Transmitter
SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM. Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum.
Benefits
Explosion protection [EEx ia] or [EEx ib] for measurements with sensors in the hazardous area
Temperature-linear characteristic for all temperature sensors
Temperature-linear characteristic can be selected for all temperature sensors
Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output
Versions for:
4 to 20 mA, 4…20 mA with HART, Profibus PA or Foundation Fieldbus
SITRANS TF Temperature Measurement | Field Transmitter
SITRANS TF is used where other transmitters can’t cope. One main point is its rating of IP67.
SITRANS TF is made of rugged die cast aluminum or long-lasting stainless steel. It transforms resistance thermometers, thermocouples, Ohm and mV signals into a load independent DC current corresponding to sensor characteristic or a digital signal according Fieldbus standard Profibus PA or Foundation Fieldbus. The remote mounted sensor prevents the transmitter heating up at high temperature; there are no vibrations and oscillations due to long neck tubes and protective pipes with SITRANS TF.
For tags with difficult access to you can mount your SITRANS TF remotely at easily accessible places and display the measured value on the freely programmable digital display (with version 4 to 20 mA).
You can even use the SITRANS TF in a version without a transmitter as a comfortable field display unit for all 4 to 20 mA signals. All SITRANS TF are available in intrinsically safe or explosion proof version
Benefits
Local sensing of measured values over digital display
Rugged two-chamber enclosure in die-cast aluminium or stainless steel
SITRANS TF280 Temperature Measurement | Field Transmitter
The SITRANS TF280 is a WirelessHART temperature transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultra low power consumption. Its compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.
Benefits
LCD display with functional display items and icons, English and German display selectable
Practical push buttons: Three push buttons for maximum efficiency for setup, diagnostics, communication and security settings with no additional devices or tools
Maintenance-friendly backlight function
Sleep mode for efficient battery life management
Battery status display on LCD and in network overview
Precise measurement accuracy for more productivity
90 and 180 degree display turnable
Configurable with standard tools which support EDD – e. g. with SIMATIC PDM
Extension cable for separate installation of the sensor
Delivery of complete tags for all applications Our wish is to meet your measuring point and sensor requirements, irrespective of the industry or application. We provide you with the necessary support and offer our wide depht of know-how.
Selection of appropriate materials for thermowells and extensions
Does your application include high temperatures, high pressures or corrosive media? Or are the temperature measurements made in rapidly flowing media? We will help you find the ideal solution. Whatever your process connections, whether flanged, screwed glands or welded, they are no problem to us.
All common sensors Choose the sensor you need from a wide range of thermocouples or resistance thermometers. Of course we will also assemble suitable transmitters for you and adjust them to the sensor and measuring range you have ordered.
It makes no difference at all whether you are measuring low or high temperatures or whether you use thermocouples or resistance thermometers- the SITRANS T family of transmitters are always a first-class partner.