ABB Electromagnetic flowmeter ABB ProcessMaster FEP300 FEP311, FEP315

 

Electromagnetic Flowmeter ProcessMaster 300

The modular design of the ProcessMaster 300 offers the industry’s widest range of liners, electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse as chemical, power, oil & gas, pulp & paper and metals & mining.

ABB FEP311 Electromagnetic Flowmeter

 

The powerful transmitter is easy to use and provides the output signal that meets your needs.
With ProcessMaster 300 you get a versatile, reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.

 

  • High measurement accuracy
  • Intuitive navigation and configuration
  • Backlit, high-contrast and configurable display
  • Detailed diagnostics for rapid decision making providing the right information to keep the process up and running
  • HART protocol is a standard with HygienicMaster 300
  • Pressure rating: PN10…100, Cl 150…600
  • Process connection: Flanges acc. to DIN/EN, ASME, JIS
  • Liner material: Hardrubber, softrubber, PTFE, PFA, ETFE
  • Max. Temperature: 180 °C ( 356 °F)
  • Ex-Approvals: ATEX, IEC Zone 1, 2 FM, CSA Div 1, 2, NEPSI Zone 1, 2, GOST
  • Verifikation: Softwaretool „ScanMaster
  • Diagnosis: Empty Pipe Detection

ProcessMaster 300 Communication Fieldbus & HART Files

ABB’s Freedom of Choice offers the right driver for the major fieldbus protocols suitable for ABB devices. The Version Matrix document shows for each protocol the Software Revision that’s compatible to the Hardware and Firmware Revision of the device.

 

Model numberFEP311, FEP315
Measured value errorStandard: 0.4 % of measured value
Option: 0.2 % of rate
Nominal size rangeDN 3 … 2000 (1/10 “ … 80 ) “
Process connectionFlange in accordance with DIN 2501/EN 1092-1, ASME B16.5/B16.47, JIS 10K
Nominal pressurePN 10 … 100, ASME CL 150, 300, 600
LiningHard rubber (DN 15 … 2000), soft rubber (DN 50 … 2000), PTFE (DN 10 … 600), PFA (DN 3 … 200), ETFE (DN 25 … 1000), Elastomer (DN 50 … 600)
Conductivity> 5 μS/cm (20 μS/cm for demineralized water)
ElectrodesStainless steel, Hastelloy B, Hastelloy C, platinum-iridium, tantalum, titanium
Process connection material Steel, stainless steel
Ingress protectionIP 65, IP 67
Medium temperature-25 … 180 °C (-13 … 356 °F)
Approvals
Explosion protection approvalsATEX/IECEx Zone 1, 2, 21, 22 FM / cFM Cl 1Div 1, Cl 1 Div 2 NEPSI Zone 1, 2 GOST Zone 1, 2
Pressure Equipment Directive 97/23/ECConformity assessment in accordance with category III, fluid group 1
CRN (Canadian Reg. Number)On request
Transmitter
Supply powerAC 100 … 230 V (-15 / +10%), AC 24 V (-30 / +10%), DC 24 V (-30 / +30%)
Current output4 … 20 mA, active or passive
Impulse outputCan be configured locally as active or passive using software
Switch outputOptocoupler, programmable function
Contact inputOptocoupler, programmable function
DisplayGraphical display, configurable
HousingIntegral mount design
CommunicationHART protocol (standard), PROFIBUS PA, FOUNDATION Fieldbus (option)

More FEP311, FEP315  ABB Electromagnetic flowmeter Best Price, Contact  Aotewell sales team.

 

Popular Products Series

SITRANS P DS3 SITRANS P DSIII

Siemens SITRANS DS-III pressure transmitter incorporates diagnostic capabilities, including high- or low-signal limit alarms, peak value registers that store maximum and minimum values for pressure, sensor temperature, and electronics temperature, and a dual-time programmable "watchdog" function that alerts you when pre-set maintenance and calibration times occur.

YOKOGAWA ZR402G Single Channel Oxygen Analyzer

The YOKOGAWA ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test.

YOKOGAWA ZR22G DIRECT IN SITU ZIRCONIA OXYGEN ANALYZER

Buy Yokogawa ZR22G Oxygen Analyzers, 100% Brand New YOKOGAWA Analyzers, Made in Japan

YOKOGAWA ZR22/ZR402G Single Channel Oxygen Analyzer

The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.

ROSEMOUNT 3300 GUIDED WAVE RADAR LEVEL TRANSMITTER

The Rosemount 3300 provides reliable and cost effective level measurements in most liquid storage and monitoring applications. Guided Wave Radar technology combined with advanced signal processing and sensitivity enables the Rosemount 3300 Series to deliver both level and interface measurement data from the same transmitter.

Rosemount 5300 Series Radar Level Transmitter

Emerson’s 5300 series of high performance guided wave transmitters are suitable for both level and interface measurement delivering accurate results with minimal maintenance and calibration requirements.

EJA210A and EJA220A Flange Mounted Differential Pressure Transmitters

The EJA210A and EJA220A are Flange-mount Liquid Level Transmitters…

EJA120A Draft Range Differential Pressure Transmitter

The EJA120A is the traditional-mount Draft Range Pressure transmitter in the series.
Load more