The 6ES7350-1AH02-0AE0 is a function module that SIMATIC S7-300 use where a failed position has to be restored with the original part. It handles fast counting or positioning on board, off the CPU scan cycle. The datasheet quotes 24 V DC supply and IP20 protection.
| Model | 6ES7350-1AH02-0AE0 |
|---|---|
| Manufacturer | SIEMENS |
| Product type | Function module (counting / positioning) |
| Product family | SIMATIC S7-300 |
| Backplane bus | Via U connector (P bus) |
| Field wiring | Front connector, screw or spring type |
| Mounting | Rack slot or 35 mm DIN rail |
| Dimensions (W×H×D) | 40 x 125 x 117 mm (single-width module) |
| Supply voltage | 24 V DC (nominal) |
| Isolation | Galvanic isolation to backplane |
| Protection degree | IP20 |
| Ambient temperature | 0 … 60 °C (horizontal mounting) |
| Storage temperature | -40 … +70 °C |
| Relative humidity | 5 … 95 %, non-condensing |
| Engineering software | STEP 7 V5.x or TIA Portal |
| Approvals | CE, UL, cULus, FM |
| Condition | Used, tested and cleaned |
| Packaging | Anti-static bag with foam protection |
| Stock Status | In stock, subject to prior sale |
| Country Of Origin | Not available |
| Warranty | 12 months |
Position in the installation
It goes into a rack slot or onto a 35 mm DIN rail. Communication runs over the backplane through the U connector. Field wires land on the front connector, screw or spring type. Configuration is done in STEP 7 V5.x or TIA Portal. The working range is 0 … 60 °C (horizontal mounting).
Compatibility notes
Function modules use their own configuration tool inside STEP 7, so keep the project version with the machine. Two units with the same family name can carry different suffixes and behave differently, so the full string matters more than the model family.
Typical applications
Machines where encoder pulses or axis moves are too fast for the standard I/O. Encoder feedback, high-speed counting and single-axis positioning are the three jobs these cards do.
For export the unit is packed in an anti-static bag with foam corner protection and shipped in a double-wall carton. The commercial invoice carries the original order number, which keeps the part booked against the right maintenance line.
Write down the slot number before you pull the old part; the rack address follows the slot, not the card. The part is checked against the order number, tested and packed for air freight. If the label is unreadable, send a photo of the part and its slot and we will identify it for you.














