Global Company
We are an international company in the UK and HK
Are you looking for SIEMENS 6ES7307-1EA80-0AA0 PLC Module Original and Made in Germany
We are an international company in the UK and HK
Save you 30% of the purchasing cost
Quick quote and quick delivery for each order/request.
Fast shipping and Quick Delivery use DHL/UPS/TNT
Input | ||
Input | 1-phase AC | |
Supply voltage | ||
● 1 at AC Rated value | 120 V | |
● 2 at AC Rated value | 230 V | |
● Note | Set by means of selector switch on the device | |
Input voltage | ||
● 1 at AC | 93 ... 132 V | |
● 2 at AC | 187 ... 264 V | |
Wide-range input | No | |
Overvoltage resistance | 2.3 × Vin rated, 1.3 ms | |
Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V | |
Rated line frequency 1 | 50 Hz | |
Rated line frequency 2 | 60 Hz | |
Rated line range | 47 ... 63 Hz | |
Input current | ||
● at rated input voltage 120 V | 2.1 A | |
● at rated input voltage 230 V | 1.2 A | |
Switch-on current limiting (+25 °C), max. | 45 A | |
Duration of inrush current limiting at 25 °C | ||
● maximum | 3 ms | |
I²t, max. | 1.8 A²·s | |
Built-in incoming fuse | T 3,15 A/250 V (not accessible) | |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 10 A characteristic C or from 6 A characteristic D | |
Output | ||
Output | Controlled, isolated DC voltage | |
Rated voltage Vout DC | 24 V | |
Total tolerance, static ± | 3 % | |
Static mains compensation, approx. | 0.2 % | |
Static load balancing, approx. | 0.4 % | |
Residual ripple peak-peak, max. | 150 mV | |
Residual ripple peak-peak, typ. | 40 mV | |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 240 mV | |
Spikes peak-peak, typ. (bandwidth: 20 MHz) | 90 mV | |
Product function Output voltage adjustable | No | |
Output voltage setting | - | |
Status display | Green LED for 24 V OK | |
On/off behavior | No overshoot of Vout (soft start) | |
Startup delay, max. | 3 s | |
Voltage rise, typ. | 100 ms | |
Rated current value Iout rated | 5 A | |
Current range | 0 ... 5 A | |
Supplied active power typical | 120 W | |
Short-term overload current | ||
● on short-circuiting during the start-up typical | 20 A | |
● at short-circuit during operation typical | 20 A | |
Duration of overloading capability for excess current | ||
● on short-circuiting during the start-up | 180 ms | |
● at short-circuit during operation | 80 ms | |
Parallel switching for enhanced performance | No | |
Efficiency | ||
Efficiency at Vout rated, Iout rated, approx. | 84 % | |
Power loss at Vout rated, Iout rated, approx. | 23 W | |
Closed-loop control | ||
Dynamic mains compensation (Vin rated ±15 %), max. | 0.3 % | |
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 3 % | |
Load step setting time 50 to 100%, typ. | 0.2 ms | |
Load step setting time 100 to 50%, typ. | 0.2 ms | |
Setting time maximum | 5 ms | |
Protection and monitoring | ||
Output overvoltage protection | Additional control loop, shutdown at approx. 30 V, automatic restart | |
Current limitation | 5.5 ... 6.5 A | |
Property of the output Short-circuit proof | Yes | |
Short-circuit protection | Electronic shutdown, automatic restart | |
Enduring short circuit current RMS value | ||
● maximum | 5 A | |
Safety | ||
Primary/secondary isolation | Yes | |
Galvanic isolation | Safety extra low output voltage Vout according to EN 60950-1 and EN 50178, creepage distances and clearances > 5 mm | |
Protection class | Class I | |
Leakage current | ||
● maximum | 3.5 mA | |
● typical | 0.3 mA | |
CE mark | Yes | |
UL/cUL (CSA) approval | UL-Listed (UL 508), File E143289, CSA (CSA C22.2 No. 142) | |
Explosion protection | - | |
FM approval | - | |
CB approval | No | |
Marine approval | - | |
Degree of protection (EN 60529) | IP20 | |
EMC | ||
Emitted interference | EN 55011 Class A | |
Supply harmonics limitation | - | |
Noise immunity | EN 61000-6-2 | |
Operating data | ||
Ambient temperature | ||
● during operation | -25 ... +70 °C | |
— Note | with natural convection | |
● during transport | -40 ... +85 °C | |
● during storage | -40 ... +85 °C | |
Humidity class according to EN 60721 | Climate class 3K5, transient condensation permitted | |
Mechanics | ||
Connection technology | screw-type terminals | |
Connections | ||
● Supply input | L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded | |
● Output | L+, M: 3 screw terminals each for 0.5 ... 2.5 mm² | |
● Auxiliary | - | |
Width of the enclosure | 80 mm | |
Height of the enclosure | 125 mm | |
Depth of the enclosure | 120 mm | |
Required spacing | ||
● top | 50 mm | |
● bottom | 50 mm | |
● left | 0 mm | |
● right | 0 mm | |
Weight, approx. | 0.57 kg | |
Product feature of the enclosure housing for side-by-side mounting | Yes | |
Installation | Can be mounted onto S7 rail | |
Mechanical accessories | Mounting adapter for standard mounting rail (6ES7390-6BA00-0AA0) | |
MTBF at 40 °C | 2 231 610 h |
AoteWell Automation Team Supply of PLC system, servo drive, HMI, display, electrical machinery, CNC machine tools and various parts of the system and the robot to maintenance, including all the major manufacturers.