6ES5262-8MA13 is the order number for an S5 closed-loop control module used in SIMATIC S5 control modules. In service it closes a control loop or drives a positioning axis in the S5 rack without loading the CPU. The datasheet quotes 5 V DC from the rack backplane and IP20 protection.
| Model | 6ES5262-8MA13 |
|---|---|
| Manufacturer | SIEMENS |
| Product family | SIMATIC S5 |
| Module type | Closed-loop control and positioning module |
| Host system | S5-115U and S5-135U racks |
| Function | Closed-loop control or positioning, per order number |
| Setpoints | Loaded from the CPU over the P bus |
| Analogue inputs | Per order number |
| Analogue outputs | Per order number |
| Cycle time | Per order number |
| Backplane bus | S5 P bus |
| Supply voltage | 5 V DC from the rack backplane |
| Mounting | Single slot in the central rack |
| Configuration tool | COM 525 or the S5 programming package |
| Protection degree | IP20 |
| Dimensions (W×H×D) | Not available |
| Weight | Not available |
| Product type | PLC Module |
| Condition | Used, tested and cleaned |
| Packaging | Anti-static bag with foam protection |
| Stock Status | In stock, subject to prior sale |
| Country Of Origin | Not available |
| Warranty | 12 months |
How it is mounted and wired
It goes into a central or expansion rack. Communication runs over the rack backplane. Configuration is done in COM 525 or the S5 programming package.
Before you order
The module carries its own parameter block, so the old parameters have to be read out before the part is pulled. Two units with the same family name can carry different suffixes and behave differently, so the full string matters more than the model family.
Typical applications
A controlled axis where the module has failed and the machine cannot run in manual or automatic. They are used on extruders, winders and indexing tables that are still controlled by an S5 CPU.
For export the unit is packed in an anti-static bag with foam corner protection and shipped in a double-wall carton. The commercial invoice carries the original order number, which keeps the part booked against the right maintenance line.
Write down the slot number before you pull the old part; the rack address follows the slot, not the card. Units come from service stock, are tested on the bench and packed with foam protection. If the label is unreadable, send a photo of the part and its slot and we will identify it for you.










