The 6ES5262-8MA13 is an S5 closed-loop control module for SIMATIC S5 control modules. It closes a control loop or drives a positioning axis in the S5 rack without loading the CPU. The datasheet quotes 5 V DC from the rack backplane and IP20 protection.
| Model | 6ES5262-8MA13 |
|---|---|
| Manufacturer | SIEMENS |
| Product family | SIMATIC S5 |
| Module type | Closed-loop control and positioning module |
| Host system | S5-115U and S5-135U racks |
| Function | Closed-loop control or positioning, per order number |
| Setpoints | Loaded from the CPU over the P bus |
| Analogue inputs | Per order number |
| Analogue outputs | Per order number |
| Cycle time | Per order number |
| Backplane bus | S5 P bus |
| Supply voltage | 5 V DC from the rack backplane |
| Mounting | Single slot in the central rack |
| Configuration tool | COM 525 or the S5 programming package |
| Protection degree | IP20 |
| Dimensions (W×H×D) | Not available |
| Weight | Not available |
| Product type | PLC Module |
| Condition | Used, tested and cleaned |
| Packaging | Anti-static bag with foam protection |
| Stock Status | In stock, subject to prior sale |
| Country Of Origin | Not available |
| Warranty | 12 months |
How it is mounted and wired
It goes into a central or expansion rack. Communication runs over the rack backplane. Configuration is done in COM 525 or the S5 programming package. The datasheet quotes protection degree as IP20, and setpoints at Loaded from the CPU over the P bus.
What to check first
The module carries its own parameter block, so the old parameters have to be read out before the part is pulled. A photo of the old label is usually enough for us to confirm the suffix before you commit to the order.
Where it is used
A controlled axis where the module has failed and the machine cannot run in manual or automatic. They are used on extruders, winders and indexing tables that are still controlled by an S5 CPU.
Stock moves fast on these, so if the unit is for a fixed shut-down window, say the date when you order and we will hold the part and time the dispatch to it instead of shipping into a warehouse nobody watches.
Shipping is by air express by default, with the tracking number sent the day the parcel leaves. When several positions of the same order number are needed, they travel in one parcel so the cabinet goes back into service in a single visit.
Keep the front connector and its wiring in place when you swap the part, because the terminal assignment does not change within the same type. Every unit is bench-tested and photographed before packing, so what you receive is what was inspected. If the label is unreadable, send a photo of the part and its slot and we will identify it for you.










