When a position in SIMATIC S5 has to be filled with the original part, the 6ES5451-2BA11 is what goes back in. It connects field wiring to the S5 bus without any change to the program. The datasheet quotes 24 V DC supply and IP20 protection.
| Model | 6ES5451-2BA11 |
|---|---|
| Manufacturer | SIEMENS |
| Product family | SIMATIC S5 |
| System compatibility | S5-90U/95U/100U/115U/135U/155U |
| Bus interface | S5 backplane (module bus) |
| Field wiring | Screw terminals on front connector |
| Supply voltage | 24 V DC (nominal) |
| Isolation | Galvanic isolation to bus |
| Protection degree | IP20 |
| Ambient temperature | 0 … 55 °C |
| Storage temperature | -25 … +70 °C |
| Relative humidity | 5 … 95 %, non-condensing |
| Engineering software | STEP 5 (S5-DOS/ST or STEP 5 V7.x) |
| Approvals | CE, UL |
| Product type | PLC I/O Module |
| Condition | Used, tested and cleaned |
| Packaging | Anti-static bag with foam protection |
| Stock Status | In stock, subject to prior sale |
| Country Of Origin | Not available |
| Warranty | 12 months |
Where it sits in the system
Communication runs over the S5 backplane. Field wires land on the front connector. Configuration is done in STEP 5 (S5-DOS/ST or STEP 5 V7.x). The working range is 0 … 55 °C.
Before you order
The module number and the voltage level in the suffix have to match the old card, because S5 racks mix 24 V and 230 V modules. The suffix decides memory, interface count or output type on most of these parts, so it is worth reading character by character.
Where it is used
Replacing a failed card on an S5 rack where the wiring is already in place. These cards are ordered from the machine drawing, one-for-one with the failed module.
Shipping is by air express by default, with the tracking number sent the day the parcel leaves. When several positions of the same order number are needed, they travel in one parcel so the cabinet goes back into service in a single visit.
Keep the front connector and its wiring in place when you swap the part, because the terminal assignment does not change within the same type. Each unit is tested, cleaned and packed in an anti-static bag before it leaves the warehouse. Send the order number from the machine drawing and we will check the unit against it before shipping.















