Yasawa A1000 frequency converter is listed here with the specification values taken from its own parameter table. For Yasawa A1000 frequency converter, the table lists rated output current (nd normal duty, variable torque) as 296 A. Yasawa A1000 frequency converter shows rated output current (hd heavy duty, constant torque) recorded as 260 A in the table. In the Yasawa A1000 frequency converter table, max applicable motor power (nd) is given as 160 kW. For Yasawa A1000 frequency converter, compare the order code on the fitted unit with the code above before a replacement is released.
A 12 month warranty applies to Yasawa A1000 frequency converter units, which are fully tested before they leave the shelf.
| Parameter | Value |
|---|---|
| Full Article Number | CIMR-AB4A0296ABA |
| Product Series | A1000 High Performance Vector Control AC Drive |
| Model Code Explanation | AB: Air-cooled NEMA Type1 / IP20 chassis; 4: 400V 3-phase class; 0296: 296A ND rated output; ABA: Standard spec, no built-in EMC filter, no built-in brake transistor |
| Input Power Supply | 3-phase AC 380–480 V, 50/60 Hz, voltage tolerance -15% ~ +10% |
| Rated Output Current (ND Normal Duty, Variable Torque) | 296 A |
| Rated Output Current (HD Heavy Duty, Constant Torque) | 260 A |
| Max Applicable Motor Power (ND) | 160 kW |
| Max Applicable Motor Power (HD) | 132 kW |
| Overload Capacity | ND: 120% rated current for 60 s; HD: 150% rated current for 60 s |
| Max Adjustable Output Voltage | 0–480 V 3-phase AC |
| Output Frequency Range | 0.01–400 Hz |
| Adjustable Carrier Frequency | 2–8 kHz; power derating required above 2 kHz |
| Supported Control Modes | Open-loop V/f, Closed-loop V/f, Open-loop vector, Closed-loop vector, PM motor vector control |
| Cooling Structure | Forced air fan cooling, internal fin heat sink |
| Built-in EMC Filter | Not equipped; external EMC filter required for CE compliance |
| Built-in Brake Transistor | None; external braking unit + resistor mandatory for rapid deceleration |
| Compatible Motor Types | 3-phase induction/asynchronous motor, permanent magnet synchronous motor |
| Regenerative Function | Not integrated; supported only via optional external regenerative feedback unit |
| Standard Onboard Communication Ports | MODBUS Slave, Serial RS-422, Serial RS-485 (NO native EtherCAT onboard) |
| Optional Communication Cards (Add-on Only) | CANopen(SI-S3), DeviceNet(SI-N3), EtherCAT Slave(SI-ES3), EtherNet/IP(SI-EN3), MECHATROLINK II(SI-T3), MODBUS/TCP(SI-EM3), POWERLINK, PROFIBUS DP(SI-P3), PROFINET(SI-EP3) |
| Standard Control I/O Terminals | 8 multi-function 24VDC digital inputs; 3 analog inputs; 1 pulse input; 4 relay digital outputs; 2 analog outputs; 1 pulse output |
| Safety Function | STO Safe Torque Off, SIL 2 / PL d safety compliance |
| Enclosure Protection Grade | IP20 / NEMA Type 1 |
| Overall Dimensions (W × H × D) | 500 mm × 800 mm × 350 mm |
| Net Weight | 102 kg |
| Continuous Operating Ambient Temp | -10 °C ~ +40 °C full load; -10 ~ +50 °C with power derating |
| Storage & Transportation Temperature | -20 °C ~ +60 °C |
| Relative Humidity | 5%–95% RH, non-condensing, no icing |
| Installation Altitude | Full power up to 1000 m; derate 1% per 100 m, max 3000 m |
| Vibration Resistance | 10–20 Hz: 9.8 m/s²; 20–55 Hz: 2.0 m/s² (large high-power frame spec) |
| Hardware Protection Functions | Overcurrent, overvoltage, undervoltage, overheat, motor overload, earth fault, output short circuit |
| Global Certifications | UL, cUL, CE, UKCA, RoHS 2.0 compliant |
| Manufacturer | YASKAWA |
| Manufacturer Part Number | CIMR-AB4A0296ABA |
| Product Type | Frequency converter |
| Country of Origin | Made in Japan |
| Supply Voltage | Not available |
| Dimensions | Not available |
| Condition | Tested and cleaned, in good working order |
| Warranty | 12 month warranty |




